GENERAL DESCRIPTION:
The FMA219 is a 2-stage, reactively matched pHEMT low-noise MMIC amplifier designed for use over 7.0 to 11.0 GHz. The amplifier requires a single +3V supply and one off-chip component for supply de-coupling. Both the input and output ports are DC de-coupled. Grounding of the amplifier is provided by plated thru-vias to the bottom of the die, no additional ground is required. The amplifier is unconditionally stable over all load states (-45 to +85°C), and conditionally stable if the input port is open-circuited.

FEATURES:
• 7.0 – 11.0 GHz Operating Bandwidth
• 1.1 dB Noise Figure
• 21 dB Small-Signal Gain
• 12 dBm Output Power
• +3V Single Bias Supply
• DC De-coupled Input and Output Ports

TYPICAL APPLICATIONS:
• Low noise front end amp
• General X-Band gain block