The EL2090 is the first complete DC restored monolithic video amplifier sub-system. It contains a very highquality video amplifier and a nulling sample-and-hold amplifier specifically designed to stabilize video performance. When the HOLD logic input is set to a logic 0 during a horizontal sync, the sample-and-hold amplifier may be used as a general-purpose op-amp to null the DC offset of the video amplifier. When the HOLD input goes to a logic 1 the sample-and-hold stores the correction voltage on the hold capacitor to maintain DC correction during the subsequent scan line.

Features
• Complete video level restoration system
• 0.01% differential gain and 0.02° differential phase accuracy at NTSC
• 100MHz bandwidth
• 0.1dB flatness to 20MHz
• Sample-and-hold has 15nA typical leakage and 1.5pC charge injection
• System can acquire DC correction level in 10µs, or 5 scan lines of 2µs each, to 1/2 IRE
• VS = ±5V to ±15V
• TTL/CMOS hold signal

Applications
• Input amplifier in video equipment
• Restoration amplifier in video mixers