DESCRIPTION
The CAT5269 is two digitally programmable potentiometers (DPPs™) integrated with control logic and 18 bytes of NVRAM memory. Each DPP consists of a series of resistive elements connected between two externally accessible end points. The tap points between each resistive element are connected to the wiper outputs with CMOS switches.

FEATURES
■ Two linear taper digitally programmable potentiometers
■ 256 resistor taps per potentiometer
■ End to end resistance 50kΩ or 100kΩ
■ Potentiometer control and memory access via 2-wire interface (I2C like)
■ Low wiper resistance, typically 100Ω
■ Nonvolatile memory storage for up to four wiper settings for each potentiometer
■ Automatic recall of saved wiper settings at power up
■ 2.5 to 6.0 volt operation
■ Standby current less than 1 µA
■ 1,000,000 nonvolatile WRITE cycles
■ 100 year nonvolatile memory data retention
■ 24-lead SOIC and TSSOP packages
■ Industrial temperature range