DESCRIPTION
The device implements a two phase step-down
controller with a 180 phase-shift between each
phase with integrated high current drivers in a
compact 10x10mm body package with exposed
pad. A precise 6-bit digital to analog converter
(DAC) allows adjusting the output voltage from
0.8375V to 1.6000V with 12.5mV binary steps
managing Dynamic VID code changes.
The high precision internal reference assures the
selected output voltage to be within 0.5% over line
and temperature variations. The high peak current
gate drive affords to have fast switching to the external power mos providing low switching losses.
The device assures a fast protection against load
over current and load over/under voltage. An internal crowbar is provided turning on the low side
mosfet if an over-voltage is detected.
In case of over-current, the system works in Constant Current mode until UVP

■ 2 PHASE OPERATION WITH
SYNCRHONOUS RECTIFIER CONTROL
■ ULTRA FAST LOAD TRANSIENT RESPONSE
■ INTEGRATED HIGH CURRENT GATE
DRIVERS: UP TO 2A GATE CURRENT
■ 6 BIT PROGRAMMABLE OUTPUT
COMPLIANT WITH VRD 10
■ DYNAMIC VID MANAGEMENT
■ 0.5% OUTPUT VOLTAGE ACCURACY
■ 10% ACTIVE CURRENT SHARING
ACCURACY
■ DIGITAL 2048 STEP SOFT-START
■ OVERVOLTAGE PROTECTION
■ OVERCURRENT PROTECTION REALIZED
USING THE LOWER MOSFET'S RdsON OR A
SENSE RESISTOR
■ OSCILLATOR EXTERNALLY ADJUSTABLE
AND INTERNALLY FIXED AT 150kHz
■ POWER GOOD OUTPUT AND ENABLE
FUNCTION
■ INTEGRATED REMOTE SENSE BUFFER

APPLICATIONS
■ POWER SUPPLY FOR HIGH CURRENT
MICROPROCESSORS
■ POWER SUPPLY FOR SERVER AND
WORKSTATION
■ DISTRIBUTED POWER SUPPLY