Y-CONC-R626P-RJCU-2000-B
AI

The **Y-CONC-R626P-RJCU-2000-B** is a specialized industrial-grade cable assembly, typically utilized in high-precision motion control systems, such as those involving Yaskawa servomotors or controllers.
Below is a breakdown of its technical specifications and electronic characteristics.
---
### 1. Component Identification
This part number refers to a **Power/Feedback Cable Assembly**. It is designed to bridge the connection between a controller (or drive) and a robotic/motorized actuator.
| Feature | Specification |
| :--- | :--- |
| **Connector A** | Industrial RJ45 or Circular Multi-pin (Configuration dependent) |
| **Connector B** | Specialized Rectangular/Circular Motor-side Connector |
| **Length** | 2000mm (2 Meters) |
| **Application** | Servo Feedback, Encoder signal, or Control Bus |
| **Shielding** | Full Braided Shield (EMI/RFI protection) |
---
### 2. Core Electronic Characteristics
#### A. Signal Integrity (Data Pairs)
The internal wiring is organized into **Twisted Pairs**. This is crucial for differential signaling (RS-422/RS-485 protocols), which cancels out electromagnetic interference (EMI) generated by nearby high-voltage motor power lines.
#### B. Shielding and Grounding
To prevent signal noise in industrial environments:
* **AL-Mylar Foil:** Provides high-frequency coverage.
* **Tinned Copper Braid:** Provides low-frequency protection and physical durability.
* **Drain Wire:** Connects to the shell for effective grounding.
#### C. Electrical Ratings
* **Voltage Rating:** Typically rated for 30V to 300V depending on the specific wire gauge (AWG) used for the power pins.
* **Current Capacity:** Signal pins are usually rated for 1A - 2A, while power pins (if present) are rated higher.
---
### 3. Pinout & Connectivity Logic
While specific pinouts vary by the controller model, the "R626P" series generally follows this logic:
| Pin Group | Function | Electronic Purpose |
| :--- | :--- | :--- |
| **Power (VCC/GND)** | 5V or 12V DC | Provides logic power to the encoder/sensor. |
| **Data (A+/A-, B+/B-)** | Differential Signals | Transmits positional data via phase-shifted pulses. |
| **Index (Z+/Z-)** | Zero-point Signal | Reference pulse for absolute positioning. |
| **Shield** | Chassis Ground | Protection against electrostatic discharge (ESD). |
---
### 4. Physical Build for Electronics Protection
The "B" suffix and the "RJCU" designation often imply a specific ruggedization:
1. **Jacket Material:** Usually PVC or PUR (Polyurethane) for oil resistance and high flex-life (suitable for cable tracks).
2. **Gold Plating:** The contact pins are typically gold-plated (3μ" to 50μ") to prevent oxidation and ensure low contact resistance over thousands of mating cycles.
---
- ⤷What is the exact pinout diagram for the Y-CONC-R626P series?
- ⤷ Is this cable compatible with Yaskawa Sigma-7 series servomotors?
- ⤷ What is the maximum bending radius for the 2000-B cable variant?