công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

  • WPT-51B-R

  • AI
    The **WPT-51B-R** is a specific electronic component typically categorized as a **Surface Mount (SMD) Tactile Switch**. These components are widely used in consumer electronics, automotive interfaces, and industrial controls to provide physical feedback to a user. Below is a detailed breakdown of its electronic and mechanical specifications. --- ### 1. General Specifications Tactile switches like the WPT-51B-R are "momentary" switches, meaning they only complete the circuit while the button is being actively pressed. | Feature | Specification | | :--- | :--- | | **Type** | Tactile Switch (Momentary) | | **Mounting Style** | Surface Mount Device (SMD/SMT) | | **Orientation** | Right Angle (Horizontal actuation) | | **Contact Arrangement** | SPST (Single Pole, Single Throw) | | **Circuit State** | Normally Open (OFF until pressed) | --- ### 2. Electrical Characteristics These parts are designed for low-power signal switching rather than high-power applications. * **Current Rating:** Typically **50mA**. * **Voltage Rating:** Usually **12V DC**. * **Contact Resistance:** $\leq 100m\Omega$ (Initial). * **Insulation Resistance:** $\geq 100M\Omega$ at 100V DC. * **Dielectric Strength:** 250V AC for 1 minute. --- ### 3. Mechanical & Material Parts The "R" in the part number often denotes **Right Angle** mounting or **Tape & Reel** packaging, depending on the manufacturer's naming convention. #### Key Components: 1. **Actuator (Button):** The plastic part the user presses. In the WPT-51B-R, this is often a low-profile stem. 2. **Contact Dome:** A stainless steel or phosphor bronze disc. This provides the "click" feel (tactile feedback) and bridges the electrical contacts. 3. **Base (Housing):** High-temperature thermoplastic (LCP or Nylon) capable of withstanding lead-free reflow soldering temperatures. 4. **Terminals:** Silver-plated brass or copper alloy for high conductivity and easy soldering. --- ### 4. Typical Application Circuit The WPT-51B-R is most commonly used as an input to a Microcontroller (MCU). ```cpp // Typical logic for a Tactile Switch in C++ if (digitalRead(SWITCH_PIN) == LOW) { // The WPT-51B-R is pressed performAction(); } ``` --- ### 5. Common Use Cases * **Reset Buttons:** Found on PCBs for microcontrollers (like Arduino or ESP32). * **User Interface:** Volume buttons, power buttons on small gadgets. * **Edge Mounting:** Because it is a right-angle switch, it is ideal for mounting on the edge of a PCB so the button protrudes through the device casing.
    ✨ Follow-up Questions
    • ⤷What is the typical operating force (in grams) for the WPT-51B-R?
    • ⤷ Does this switch come in different stem heights for custom enclosures?
    • ⤷ What are the recommended reflow soldering temperature profiles for this SMD part?