công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

  • W2AP-G14-R/CE

  • AI
    The **W2AP-G14-R/CE** is a high-performance **Wireless Access Point (WAP)** module typically utilized in industrial automation, robotics, and commercial IoT applications. It is designed to bridge the gap between wired Ethernet networks and wireless devices. ### 1. Key Technical Specifications | Feature | Specification | | :--- | :--- | | **Wireless Standard** | IEEE 802.11 b/g/n (2.4 GHz Band) | | **Interface** | Ethernet (RJ45) / Serial-to-WiFi bridging | | **Input Voltage** | Typically 5V DC to 12V DC (Model dependent) | | **Antenna Connector** | Usually integrated or R-SMA connector | | **Form Factor** | Compact, Rail-mountable or embedded module | | **Operational Temp** | Industrial grade (-20°C to +70°C) | --- ### 2. Core Electronic Components & Architecture The internal circuitry of the W2AP-G14-R/CE consists of several critical subsystems: #### A. The Wireless SoC (System on Chip) The heart of the module is an integrated WiFi chip (often based on Realtek or Atheros chipsets). This handles the: * **MAC (Media Access Control):** Manages data framing and collision avoidance. * **Baseband Processor:** Converts digital data into signals ready for radio transmission. #### B. RF Front-End (Radio Frequency) * **Power Amplifier (PA):** Boosts the signal for transmission to ensure long-range coverage. * **Low Noise Amplifier (LNA):** Enhances weak incoming signals from other devices. * **Band Pass Filters (BPF):** Removes interference from other wireless frequencies (like Bluetooth or Microwave ovens). #### C. Power Management Unit (PMU) Because industrial environments have "dirty" power, this part includes: * **Voltage Regulators:** Steps down input voltage to the 3.3V or 1.8V required by the chips. * **Protection Circuits:** TVS diodes to prevent damage from Electrostatic Discharge (ESD) and surges. #### D. Connectivity Interface * **Ethernet PHY:** A physical layer chip that manages the wired connection to the local area network. * **Flash Memory:** Stores the firmware, configuration settings, and security protocols (WPA2/WPA3). --- ### 3. Application Use Cases 1. **PLC Communication:** Connecting Programmable Logic Controllers to a wireless monitoring station. 2. **AGV/AMR Robotics:** Providing a stable data link for autonomous mobile robots in a warehouse. 3. **Serial-to-Wireless:** Converting legacy RS-232/485 data into WiFi packets for remote cloud monitoring. ---
    ✨ Follow-up Questions
    • ⤷ What are the specific pinout diagrams for the W2AP-G14-R/CE header?
    • ⤷ How do I configure the W2AP-G14-R/CE for Client Mode vs Access Point Mode?
    • ⤷ What is the maximum data throughput supported by this module?