công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

  • W2AP-A1G-R2/UL

  • AI
    ## Overview: W2AP-A1G-R2/UL The **W2AP-A1G-R2/UL** is a specific model within the **W2 series** of AC/DC signal conditioners (transducers) manufactured by **M-System** (now often branded under **MG CO., LTD.**). This device is designed to measure an Alternating Current (AC) signal and convert it into a standardized Direct Current (DC) signal. The "UL" suffix indicates it meets specific safety standards for the North American market. --- ### Key Technical Specifications | Feature | Specification | | :--- | :--- | | **Primary Function** | AC Current Transmitter (Average Sensing) | | **Input Signal** | 0 – 1 A AC | | **Output Signal** | 4 – 20 mA DC | | **Power Supply** | 100 – 240V AC | | **Construction** | Terminal block type (Plug-in) | | **Accuracy** | ±0.3% | | **Response Time** | ≤ 0.5 seconds (0 – 90%) | --- ### Component Breakdown & Design The internal electronics of this unit are categorized into three main functional stages: #### 1. Input Stage (Sensing) * **Isolation Transformer:** The input AC current (0-1A) enters through an internal current transformer. This provides galvanic isolation between the high-power input and the sensitive processing electronics. * **Rectification Circuit:** Since this is an "Average Sensing" model, it uses a bridge rectifier to convert the AC waveform into a pulsating DC signal. #### 2. Signal Conditioning Stage * **Filtering:** Capacitors and low-pass filters smooth the rectified signal to derive the average value of the AC input. * **Operational Amplifiers (Op-Amps):** These are used to scale the small voltage derived from the input to a linear level suitable for the output stage. * **Zero/Span Adjustments:** Accessible potentiometers on the front allow for fine-tuning the 4mA (Zero) and 20mA (Span) points. #### 3. Output Stage (Transmission) * **V/I Converter:** A voltage-to-current converter circuit ensures that the output remains a constant 4-20mA regardless of the load resistance (up to a specified limit, usually 600 $\Omega$). * **Isolation Barrier:** Optical or magnetic couplers ensure that the output signal is electrically isolated from both the input and the power supply. --- ### Terminal Connections (Typical) | Terminal No. | Function | Description | | :--- | :--- | :--- | | **1 - 2** | Output (+) / (-) | 4-20mA DC Signal | | **3 - 4** | Input (U) / (V) | 0-1A AC Current | | **5 - 6** | Power Supply (L) / (N) | 100-240V AC Power | --- ### Standards and Certifications * **UL/cUL Listed:** Evaluated to UL 61010-1 and CAN/CSA-C22.2 No. 61010-1 standards. * **CE Marking:** Complies with EMC and Low Voltage Directives.
    ✨ Follow-up Questions
    • ⤷ What is the maximum load resistance allowed for the 4-20mA output?
    • ⤷ How does 'Average Sensing' differ from 'RMS Sensing' in this specific model?
    • ⤷ Is there a version of this device that supports a 0-5A AC input?