TCS-5D-R/K
AI

The **TCS-5D-R/K** is a specific variant of an electromechanical power relay, typically manufactured by brands like **Goodsky** or other industrial relay suppliers. It is designed for high-current switching in compact spaces.
---
### 1. Key Technical Specifications
The part number follows a standard coding convention for relays. Here is the breakdown of its electrical characteristics:
| Parameter | Specification | Description |
| :--- | :--- | :--- |
| **Coil Voltage** | 5V DC | The input voltage required to activate the electromagnet. |
| **Contact Form** | 1 Form C (SPDT) | Includes one Common, one Normally Open (NO), and one Normally Closed (NC) pin. |
| **Current Rating** | 10A to 15A | Capable of switching significant AC or DC loads. |
| **Voltage Rating** | 250V AC / 30V DC | Maximum switching voltage for the contacts. |
| **Contact Material** | Ag Alloy (Silver Alloy) | Provides low contact resistance and high durability. |
| **Mounting Type** | Through-Hole (PCB) | Standard pins for soldering onto a Printed Circuit Board. |
---
### 2. Breakdown of the Model Name
Relay manufacturers use suffix codes to define specific build features:
* **TCS**: The series designation (usually a "Miniature High Power Relay").
* **5D**: Indicates a **5 Volt DC** coil power requirement.
* **R**: Often signifies the **Contact Arrangement** or a specific **Sealing Type** (e.g., Flux-tight or Wash-tight).
* **K**: Usually indicates a **High Sensitivity** coil or a specific **Contact Material** variation (K is often used for Silver Tin Oxide contacts, which resist welding better).
---
### 3. Electronic Components Internal to the Relay
The TCS-5D-R/K consists of four primary internal components:
1. **The Coil (Electromagnet):** A copper wire winding that creates a magnetic field when 5V DC is applied.
2. **The Armature:** A moving metal piece that is pulled toward the coil when energized.
3. **Spring Mechanism:** Returns the armature to its original position when the 5V power is removed.
4. **Contacts:** The physical "switch" points.
* **Common (COM):** The moving contact.
* **Normally Closed (NC):** Touches COM when power is OFF.
* **Normally Open (NO):** Touches COM when power is ON.
---
### 4. Implementation Circuit
When using this relay with a microcontroller (like an Arduino or ESP32), you cannot drive the coil directly from a GPIO pin because the relay requires more current than the pin can provide.
**Required Supporting Components:**
* **Transistor (NPN):** Acts as the electronic switch to trigger the 5V coil.
* **Flyback Diode (1N4007):** Placed across the relay coil to protect the circuit from high-voltage spikes when the relay turns off.
* **Resistor:** Placed at the base of the transistor to limit current.
```cpp
// Example: Logic for triggering the relay
int relayPin = 7;
void setup() {
pinMode(relayPin, OUTPUT);
}
void loop() {
digitalWrite(relayPin, HIGH); // Relay Clicks (COM connects to NO)
delay(2000);
digitalWrite(relayPin, LOW); // Relay Releases (COM connects to NC)
delay(2000);
}
```
---
- ⤷What is the maximum power consumption of the 5V DC coil in this relay?
- ⤷ Can I use a 3.3V signal to trigger the TCS-5D-R/K through a transistor?
- ⤷ What are the physical dimensions of the TCS series relay for PCB layout?