SR38-R-3S
AI

The **SR38-R-3S** is a specific model of slip ring, a mechanical-electrical device designed to transmit power and signals from a stationary structure to a rotating one. Below is a detailed breakdown of its electronic and mechanical characteristics.
### 1. Overview and Key Specifications
The SR38-R-3S is characterized by its compact through-bore design, typically used in industrial automation and robotics.
| Parameter | Specification |
| :--- | :--- |
| **Model Number** | SR38-R-3S |
| **Outer Diameter** | 38 mm |
| **Circuit Count** | 3 Circuits (indicated by "3S") |
| **Current Rating** | Typically 2A - 10A per circuit (model dependent) |
| **Voltage Rating** | 240 VAC / DC |
| **Operating Speed** | 0 - 300 RPM |
| **Contact Material** | Gold-to-Gold (Precious metals) |
---
### 2. Electronic Components & Construction
#### A. The Rotating Interface (Rotor)
The "R" in the model name usually signifies the rotating component. It consists of high-conductivity rings mounted on a central shaft. These rings are separated by insulating spacers to prevent short-circuiting between signals.
#### B. The Brush Block (Stator)
The brush block contains specialized wire brushes. In the SR38-R-3S, these are often **Gold-on-Gold** contacts.
* **Gold Alloy:** Provides low electrical noise and minimal resistance.
* **Low Friction:** Ensures a long lifespan with minimal wear debris.
#### C. Wiring and Lead Wires
The unit features color-coded lead wires (typically Teflon™ insulated) for both the stator and rotor sides.
* **Signal Integrity:** Designed to handle sensitive signals (Ethernet, PLC, sensors) without significant EMI interference.
* **Wire Gauge:** Usually 22 AWG or 26 AWG depending on the current capacity.
---
### 3. Applications
The SR38 series is commonly found in the following electronic systems:
1. **CCTV Systems:** Providing continuous power and video feed to rotating cameras.
2. **Robotic Arms:** Allowing the "wrist" or "waist" to spin 360 degrees without tangling wires.
3. **Medical Equipment:** Used in rotary tables or scanning equipment.
4. **Wind Turbines:** Transmitting sensor data from the rotating blades to the stationary hub.
---
### 4. Technical Maintenance Considerations
* **Dielectric Strength:** The insulation between circuits is usually rated for 500V @50Hz.
* **Insulation Resistance:** $> 500M\Omega$ at 500VDC to ensure signal isolation.
* **Electrical Noise:** Typically less than $10m\Omega$ during rotation.
---
- ⤷
What are the specific torque requirements for the SR38-R-3S?
- ⤷ How does gold-to-gold contact compare to carbon brushes in slip rings?
- ⤷ Can the SR38-R-3S handle high-frequency data transmission like 4K video?