công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

  • SMC1210-R15M

  • AI
    The **SMC1210-R15M** is a surface-mount power inductor commonly used in electronic circuits for filtering, decoupling, and energy storage. Below is a detailed breakdown of its technical specifications and characteristics. --- ### 1. General Specifications The part number typically follows a standard naming convention that describes its size and electrical properties: | Feature | Specification | Description | | :--- | :--- | :--- | | **Component Type** | Fixed Inductor | Non-adjustable surface-mount device (SMD) | | **Case Size** | 1210 (Metric 3225) | 3.2mm x 2.5mm physical footprint | | **Inductance** | 0.15 µH | Indicated by "R15" (R acts as a decimal) | | **Tolerance** | ±20% | Indicated by "M" | | **Construction** | Wire-wound or Ferrite | Designed for high-frequency performance | --- ### 2. Electrical Characteristics While specific values may vary slightly by manufacturer (such as Bourns or TDK), the standard 1210 0.15µH inductor generally follows these parameters: * **Self-Resonant Frequency (SRF):** Typically very high (often >400 MHz), making it suitable for high-speed signal filtering. * **DC Resistance (DCR):** Usually low (mΩ range) to minimize power loss and heat generation. * **Rated Current (Idc):** The maximum current the inductor can handle before reaching a specific temperature rise or saturation point. * **Operating Temperature:** Generally ranges from -40°C to +125°C. --- ### 3. Applications and Usage This part is frequently found in the following electronic contexts: 1. **DC-DC Converters:** Used as a storage element in high-frequency switching power supplies. 2. **Noise Filtering:** Implemented in EMI/RFI suppression circuits to prevent high-frequency noise from entering or leaving a system. 3. **RF Circuits:** Due to the low inductance value (0.15µH), it is often used in impedance matching or decoupling in radio frequency applications. 4. **Consumer Electronics:** Found in smartphones, laptops, and tablets where space is at a premium. --- ### 4. Key Advantages * **Small Footprint:** The 1210 size allows for high-density PCB layouts. * **Durability:** The molded or wire-wound construction provides good mechanical strength and resistance to vibration. * **Reflow Soldering:** Designed to withstand the high temperatures of standard SMD assembly processes. ---
    ✨ Follow-up Questions
    • ⤷ What are the equivalent substitutes for the SMC1210-R15M from different manufacturers?
    • ⤷ How does the 'M' tolerance impact the performance of a power supply circuit?
    • ⤷ What is the maximum current rating typically associated with a 0.15uH 1210 inductor?