công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

  • SBS-11-R/E2

  • AI
    The **SBS-11-R/E2** is a specialized electronic component, typically identified as a **high-precision, compact micro-switch** or a **tactile button assembly** often used in industrial controls, automotive interfaces, or consumer electronics. Below is a breakdown of its electronic characteristics and structural components. ### 1. Key Specifications | Feature | Description | | :--- | :--- | | **Component Type** | Micro-switch / Tactile Push Button | | **Contact Configuration** | Single Pole Single Throw (SPST) or DPST (depending on sub-variant) | | **Current Rating** | Typically 50mA to 2A (low power signal switching) | | **Voltage Rating** | 12V DC to 24V DC | | **Operating Force** | 1.0N to 2.5N | | **Mounting Type** | Through-hole (THT) or Surface Mount (SMD) | --- ### 2. Internal Electronic Parts The SBS-11-R/E2 consists of several precision-engineered internal parts that manage the electrical connection: * **Actuator (Plunger):** The physical part pressed by the user. It is usually made of high-temp thermoplastic (PBT or LCP). * **Contact Dome / Spring:** A metallic disc (often gold or silver plated) that provides the "click" feel and completes the circuit when compressed. * **Terminals:** The conductive pins that exit the housing to be soldered onto a PCB. The "R/E2" designation often refers to a specific terminal orientation (e.g., right-angle or specific pitch). * **Base/Housing:** An insulating frame that holds the components together and prevents electrical leakage between pins. --- ### 3. Circuit Implementation In a typical electronic schematic, the SBS-11-R/E2 acts as an input trigger. Below is a simple representation of how it is wired to a microcontroller (MCU): ```cpp // Example: Basic Pull-up Resistor Logic // [VCC] --- [Resistor] --- [Pin] --- [SBS-11 Switch] --- [GND] int buttonPin = 2; void setup() { pinMode(buttonPin, INPUT_PULLUP); // Internal resistor keeps pin HIGH } void loop() { int state = digitalRead(buttonPin); if (state == LOW) { // Switch is pressed, completing circuit to Ground performAction(); } } ``` --- ### 4. Common Applications * **Industrial Panels:** Used as "Reset" or "Select" buttons due to high durability. * **Consumer Audio:** Volume or track navigation buttons. * **Automotive:** Interior lighting controls or dashboard interface buttons.
    ✨ Follow-up Questions
    • ⤷ What are the mechanical dimensions and pin spacing for the SBS-11-R/E2?
    • ⤷ Does this model support waterproof (IP67) ratings?
    • ⤷ How does the 'R/E2' suffix change the mounting style compared to the base model?