MH16TDD-R
AI

Based on the technical specifications for the **MH16TDD-R**, it is categorized as a high-performance **Magnetic Buzzer (Transducer)** designed for surface mount applications.
Here is a detailed breakdown of its electronic characteristics and construction.
---
## 1. Technical Specifications
The MH16TDD-R is an electromagnetic component that converts electrical signals into audible sound. Unlike piezo buzzers, magnetic transducers require an external drive circuit (oscillator) to function.
| Parameter | Specification |
| :--- | :--- |
| **Type** | Magnetic Transducer (External Drive) |
| **Rated Voltage** | 1.5 Vp-p (Typical) |
| **Operating Voltage** | 1.0 ~ 2.0 Vp-p |
| **Rated Current** | Max 80 mA |
| **Sound Pressure Level (SPL)** | Min 85 dB (at 10cm) |
| **Resonant Frequency** | 2048 Hz |
| **Coil Resistance** | 16 ± 3 Ω |
| **Mounting Type** | SMD (Surface Mount Device) |
---
## 2. Internal Components
The electronic functionality of the MH16TDD-R relies on three primary internal parts:
1. **Electromagnetic Coil:** A coil of fine copper wire that generates a magnetic field when current passes through it. The 16-ohm resistance is a key metric for matching with the driver circuit.
2. **Permanent Magnet:** Provides a static magnetic field that interacts with the coil's field.
3. **Vibrating Diaphragm:** A thin metal plate (usually iron) that moves back and forth in response to the magnetic fluctuations, creating sound waves.
---
## 3. Driving Circuit Requirements
Since this is a **transducer** (not a self-contained indicator), it requires an AC or square wave signal to operate. A simple DC voltage will not produce sound.
### Recommended Implementation
To drive the MH16TDD-R with a microcontroller (like an Arduino or ESP32), a transistor switching circuit is required due to the 80mA current draw:
```c
// Example Pseudocode for 2048Hz Tone
void setup() {
pinMode(BUZZER_PIN, OUTPUT);
}
void loop() {
tone(BUZZER_PIN, 2048); // Outputs square wave at resonant frequency
delay(500);
noTone(BUZZER_PIN);
delay(500);
}
```
---
## 4. Physical Dimensions & Reliability
* **Dimensions:** Usually 16mm x 16mm footprint (hence the "16" in the part number).
* **Reflow Soldering:** Designed to withstand standard SMD reflow temperatures ($260^\circ C$).
* **Polarity:** The device is polarized; the positive (+) terminal must be oriented correctly according to the PCB layout for optimal performance.
---
- ⤷
What is the difference between this magnetic transducer and a piezo buzzer?
- ⤷ Can I drive this component directly from a microcontroller GPIO pin?
- ⤷ What happens if I drive the MH16TDD-R at a frequency other than 2048Hz?