công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

  • M95256-RMW6P

  • AI
    ## Overview of M95256-RMW6P The **M95256-RMW6P** is a high-performance, electrically erasable programmable memory (EEPROM) manufactured by STMicroelectronics. It is designed for applications that require non-volatile data storage with high reliability and a serial interface. ### Key Specifications | Feature | Specification | | :--- | :--- | | **Memory Size** | 256 Kbit (32,768 x 8 bits) | | **Interface** | SPI (Serial Peripheral Interface) | | **Operating Voltage (Vcc)** | 1.8V to 5.5V | | **Clock Frequency** | Up to 20 MHz (at 4.5V - 5.5V) | | **Package Type** | SO8N (Narrow SOIC, 150 mil width) | | **Temperature Range** | -40°C to +85°C (Industrial Grade) | | **Write Cycles** | 4 Million cycles (Typical) | | **Data Retention** | 200 Years | --- ### Functional Components The internal architecture of the M95256-RMW6P consists of several critical electronic sections that manage data integrity and communication: 1. **Memory Array**: The core 256 Kbit EEPROM cells arranged in pages of 64 bytes. 2. **SPI Logic Block**: Handles the four standard SPI signals: * **S (Chip Select)**: Activates the device. * **D (Serial Data Input)**: Receives instructions and data. * **Q (Serial Data Output)**: Sends data out to the host. * **C (Serial Clock)**: Synchronizes data movement. 3. **Status Register**: A volatile register used to check the progress of write operations and to set write protection parameters. 4. **Write Protection Logic**: Includes a **W (Write Protect)** pin and internal software bits to prevent accidental data overwriting. 5. **Hold Circuitry**: Controlled by the **HOLD** pin, this allows the MCU to pause communication without resetting the SPI sequence. --- ### Part Number Breakdown The suffix **"RMW6P"** provides specific details about the physical and electrical configuration: * **R**: Operating voltage range of 1.8V to 5.5V. * **MW**: Package type SO8N (150 mil width). * **6**: Industrial temperature range (-40°C to +85°C). * **P**: Lead-free and RoHS compliant (ECOPACK2). --- ### Typical Application Circuit Below is a representation of how the M95256-RMW6P is typically connected to a microcontroller (MCU): ```c // SPI Connection Pinout [ MCU ] [ M95256-R ] CS ------------> Pin 1 (S) MISO <------------ Pin 2 (Q) (Vcc) <---[R]--- Pin 3 (W) // Pull-high to enable writing GND ------------- Pin 4 (Vss) MOSI ------------> Pin 5 (D) SCK ------------> Pin 6 (C) (Vcc) <---[R]--- Pin 7 (HOLD) // Pull-high to avoid pause VCC ------------- Pin 8 (Vcc) ``` --- ### Main Features and Use Cases * **Byte and Page Write**: Supports writing a single byte or a full page (up to 64 bytes) in a single cycle. * **Low Power Consumption**: Consumes very little current in standby mode, making it ideal for battery-powered devices. * **Usage**: Commonly found in consumer electronics, automotive modules (dashboards, sensors), and industrial controllers for storing configuration settings, calibration data, and logs.
    ✨ Follow-up Questions
    • ⤷ What are the specific timing requirements for the 'Write' cycle in this EEPROM?
    • ⤷ How does the 'Hold' function differ from simply deselecting the Chip Select (S) pin?
    • ⤷ Can this device operate at 10 MHz when the supply voltage is at 1.8V?