AI

The **M95160-RDL6T** is a low-voltage, high-speed Serial Peripheral Interface (SPI) EEPROM (Electrically Erasable Programmable Read-Only Memory) manufactured by STMicroelectronics. It is commonly used for parameter storage in consumer electronics, automotive, and industrial applications.
---
## 1. Technical Specifications
Below are the primary electrical and physical characteristics:
| Parameter | Specification |
| :--- | :--- |
| **Memory Size** | 16 Kbit (2,048 x 8 bits) |
| **Interface** | SPI (Serial Peripheral Interface) |
| **Operating Voltage** | 1.8V to 5.5V |
| **Clock Frequency** | 20 MHz (at 4.5V - 5.5V), 5 MHz (at 1.8V) |
| **Package Type** | MLP / DFN8 (2x3 mm) |
| **Operating Temp** | -40°C to +85°C |
| **Write Cycles** | 4 Million cycles (Endurance) |
| **Data Retention** | 200 Years |
---
## 2. Key Pin Functions
The device typically comes in an 8-pin configuration. Understanding the pinout is crucial for PCB design:
1. **S (Chip Select):** When low, the device is selected. When high, it is in standby.
2. **D (Serial Data Input):** Used to transfer data into the device.
3. **Q (Serial Data Output):** Used to read data out of the device.
4. **C (Serial Clock):** Provides the timing for data transfer.
5. **W (Write Protect):** Hardware protection to prevent unauthorized write operations.
6. **HOLD:** Used to pause communication without deselecting the device.
7. **Vcc/Vss:** Power supply and Ground.
---
## 3. Part Number Breakdown (M95160-RDL6T)
The alphanumeric code provides specific details about the chip's build:
* **M95:** SPI family of EEPROMs.
* **160:** Density (16 Kilobits).
* **-R:** Operating voltage range (1.8V to 5.5V).
* **DL:** Device Grade / Specific Package process.
* **6:** Industrial temperature range (-40°C to +85°C).
* **T:** Tape and Reel packaging.
---
## 4. Operational Features
### SPI Modes
The M95160 supports SPI modes **0 (0,0)** and **3 (1,1)**. Data is latched on the rising edge of the clock (C) and shifted out on the falling edge.
### Page Write
The memory is organized into pages of **32 bytes**. A single write instruction can write between 1 and 32 bytes, provided they are within the same page boundary.
### Block Protection
The device includes a Status Register that allows the user to software-protect sections of the memory (Quarter, Half, or Whole) via the **BP0** and **BP1** bits.
---
- ⤷
How does the Write Protect (W) pin interact with the Status Register?
- ⤷ What are the power consumption levels in Standby vs Active mode?
- ⤷ Can this EEPROM be used in automotive applications (AEC-Q100)?