The question interval is too short. Please try again in a few seconds.
M5VS-44-R
AI
The **M5VS-44-R** is a specific model of a **Signal Conditioner** (specifically a Potentiometer Transmitter) manufactured by **M-System**. It is designed to interface with a potentiometer and convert the resistance position into a standardized analog signal.
---
## 1. Technical Specifications
The "M5VS-44-R" model code defines its specific electrical characteristics. Below is the breakdown of the electronic parts and configurations:
| Feature | Specification | Description |
| :--- | :--- | :--- |
| **Input Signal** | Potentiometer | Range: 100 $\Omega$ to 10 k$\Omega$ |
| **Output Signal (4)** | 4 – 20 mA DC | Standard current loop output |
| **Power Input (4)** | 4 – 20 mA DC | Loop-powered (2-wire system) |
| **Mounting** | DIN Rail | Standard 35mm rail mounting |
| **Accuracy** | $\pm 0.1\%$ | High precision signal processing |
---
## 2. Core Electronic Components
The internal circuitry of the M5VS series is composed of several critical electronic stages:
### A. Input Stage (Bridge Circuit)
* **Reference Voltage:** Provides a stable voltage across the external potentiometer.
* **Signal Detection:** Measures the position of the wiper. It translates the resistance ratio into a low-level voltage signal.
### B. Signal Conditioning & Isolation
* **Operational Amplifiers (Op-Amps):** Used for impedance matching and initial amplification of the potentiometer signal.
* **Optical/Galvanic Isolation:** The device provides 2000V AC isolation between the input and the output/power loop to prevent ground loops and protect control systems.
### C. Output Driver (Current Loop)
* **Voltage-to-Current Converter:** The internal logic converts the processed signal into a precise 4-20mA DC current.
* **Protection Circuitry:** Includes surge protectors and reverse-polarity protection to safeguard the unit from wiring errors.
---
## 3. Terminal Connection Diagram
The device typically uses a 4-terminal or 8-terminal configuration depending on the base socket:
| Terminal No. | Function | Connection Type |
| :--- | :--- | :--- |
| **1** | Output / Power (+) | Connect to PLC / Power Supply (+) |
| **2** | Output / Power (-) | Connect to PLC / Power Supply (-) |
| **5** | Potentiometer High | Top end of the pot |
| **6** | Potentiometer Wiper | Center tap (signal) |
| **7** | Potentiometer Low | Bottom end of the pot |
---
## 4. Key Performance Indicators
* **Response Time:** $\leq$ 0.5 seconds (0 – 90%).
* **Temperature Coefficient:** $\pm 0.015\%$ per degree Celsius.
* **Isolation Resistance:** 100 M$\Omega$ minimum at 500V DC.
✨ Follow-up Questions
⤷
How do you calibrate the Zero and Span on the M5VS-44-R?
⤷ What is the maximum load resistance supported by the 4-20mA output?
⤷ Can this unit be used with a 3-wire potentiometer?