M5RJ76EQJ-R
AI

The part number **M5RJ76EQJ-R** refers to a high-precision, automotive-grade thin film chip resistor manufactured by **Susumu**. It belongs to the **HRG series**, which is known for its high power handling capabilities in small packages and excellent reliability.
---
### 1. Technical Specifications
Below are the primary technical parameters for this electronic component:
| Parameter | Specification |
| :--- | :--- |
| **Manufacturer** | Susumu |
| **Series** | HRG Series (High Power Thin Film) |
| **Resistance** | 76 Ohms (derived from the '76E' coding) |
| **Tolerance** | ±0.1% (High Precision) |
| **Power Rating** | 0.5W to 1W (High power density for 1206 size) |
| **Temperature Coefficient (TCR)** | ±25 ppm/°C |
| **Package / Case** | 1206 (3216 Metric) |
| **Operating Temperature** | -55°C to +155°C |
---
### 2. Key Features
* **Thin Film Technology:** Unlike thick film resistors, thin film provides significantly lower noise, better stability, and tighter tolerances.
* **High Power Density:** The HRG series is designed with a unique structure that allows it to handle much higher power than standard 1206 thin-film resistors (usually 0.25W).
* **Inorganic Passivation:** It uses a specialized inorganic thin-film coating that offers superior moisture resistance and prevents sulfurization.
* **AEC-Q200 Compliant:** This part is qualified for automotive use, ensuring high reliability under thermal shock and vibration.
---
### 3. Application Use Cases
Due to its precision and power handling, the M5RJ76EQJ-R is typically used in the following scenarios:
1. **Automotive Electronics:** Power control units, engine sensors, and battery management systems (BMS).
2. **Industrial Equipment:** High-precision measurement tools and industrial robotics.
3. **Medical Devices:** Imaging equipment and diagnostic tools where signal integrity is critical.
4. **Telecommunications:** Base station power supplies and high-frequency communication modules.
---
### 4. Part Number Breakdown (Generic Susumu HRG)
While exact alphanumeric sequences can vary by distributor, the typical breakdown for this series is:
* **HRG (M5):** Series identifier / High Power.
* **3216 (J):** Case size 3.2mm x 1.6mm (1206).
* **76E:** Resistance value (76 Ohms).
* **Q:** TCR (±25 ppm/°C).
* **B/D/F:** Tolerance indicator (Q or B usually denotes ±0.1%).
* **-R:** Packaging (Tape and Reel).
---
- ⤷What is the difference between thin film and thick film resistors in high-power applications?
- ⤷ Can this resistor be used in high-sulfur environments?
- ⤷ What are the recommended soldering profiles for the Susumu HRG series?