M5RJ74UPJ-R
AI

The part number **M5RJ74UPJ-R** refers to a high-performance **RJ45 Connector with Integrated Magnetics** (often called a "MagJack"), typically manufactured by companies like **Link-PP** or compatible hardware vendors.
These components are essential in networking hardware to provide physical connectivity and electrical isolation for Ethernet interfaces.
---
### 1. Key Technical Specifications
| Parameter | Specification |
| :--- | :--- |
| **Connector Type** | RJ45 Female |
| **Orientation** | Right Angle (90°) / Tab-Up |
| **Ethernet Speed** | 10/100/1000 Base-T (Gigabit Ethernet) |
| **Number of Ports** | 1x1 (Single Port) |
| **LED Configuration** | Green / Yellow (Standard status indicators) |
| **Mounting Type** | Through-Hole (THT) |
| **Shielding** | EMI Finger/Metallic Shielding |
---
### 2. Functional Electronic Components
The "Integrated Magnetics" inside this part consist of several discrete components condensed into the RJ45 housing:
* **Isolation Transformer:** Protects the internal circuitry from high-voltage surges on the network line (typically rated for 1500Vrms).
* **Common Mode Chokes:** Used to suppress Electromagnetic Interference (EMI) and noise to ensure signal integrity.
* **Termination Resistors:** Usually 75-ohm resistors (Bob Smith Termination) to reduce reflections and handle common-mode signals.
* **High-Voltage Capacitor:** Provides a path for AC noise to ground while maintaining DC isolation.
---
### 3. Pinout and Internal Logic
The part typically follows the standard **Gigabit Magnetics Schematic**:
1. **PHY Side Pins:** Connects to the Ethernet Controller/PHY chip on your PCB.
2. **Cable Side Pins:** Standard 8-pin interface for the Cat5e/Cat6 Ethernet cable.
3. **LED Pins:** Four pins (two for each LED) that require current-limiting resistors on the PCB side to indicate Link and Activity status.
---
### 4. Applications
* **Networking Gear:** Switches, Routers, and Hubs.
* **Industrial PC:** Embedded motherboards and Single Board Computers (SBCs).
* **IoT Gateways:** Devices requiring wired internet stability.
* **Consumer Electronics:** Smart TVs and Game Consoles.
---
- ⤷
Does this part require external resistors for the LEDs
- ⤷ or are they integrated?
- ⤷ What is the specific footprint/dimensions for the M5RJ74UPJ-R PCB layout?
- ⤷ Is this part compatible with Power over Ethernet (PoE) applications?