công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

  • M2PV-C1Z-R/UL

  • AI
    The **M2PV-C1Z-R/UL** is a specialized electronic component, typically classified as a **Signal Converter** or **Transducer**, manufactured by **M-System (now MG CO., LTD.)**. It is part of the M2 series of plug-in signal conditioners. Below is a detailed breakdown of its electronic specifications and characteristics. --- ## 1. Core Specifications The model code `M2PV-C1Z-R/UL` is a configuration string where each character defines a specific electronic attribute. | Component Code | Specification Detail | Description | | :--- | :--- | :--- | | **M2PV** | Base Model | Power Multimeter / Phase Angle Transducer | | **C1** | Input Type | AC Voltage (specifically designed for phase/power sensing) | | **Z** | Output Type | Specify (Usually Custom or Current Output) | | **R** | Power Input | 24V DC | | **UL** | Certification | UL/cUL recognized for North American safety standards | --- ## 2. Electronic Architecture This device functions by taking a high-level AC signal and converting it into a low-level DC signal suitable for PLC (Programmable Logic Controller) inputs or SCADA systems. ### A. Input Section * **Galvanic Isolation:** The input is optically or transformer-isolated from the output and power supply to prevent ground loops and protect sensitive equipment. * **Measurement Range:** Typically designed to handle standard industrial AC voltages (e.g., 110V/220V AC). ### B. Output Section * **Signal Type:** Most "Z" configurations in this series are calibrated for **4–20 mA DC** or **1–5V DC**. * **Load Resistance:** If the output is current (4-20mA), it generally supports a drive capability of up to 750Ω. ### C. Power Supply (`R`) * **Voltage:** 24V DC. * **Tolerance:** Operates within ±10% ripple. * **Consumption:** Approximately 2W to 3W. --- ## 3. Physical & Safety Characteristics * **Housing:** Plug-in style base. This allows the electronic module to be replaced without disconnecting the wiring from the terminal block. * **Isolation Resistance:** Minimum of 100 MΩ at 500V DC. * **Dielectric Strength:** Usually rated for 2000V AC for 1 minute (Input to Output to Power to Ground). --- ## 4. Pin Configuration (Typical) *Note: Always verify with the specific wiring diagram on the side of the unit.* ```text [ Terminal Layout ] 1. Output (+) 2. Output (-) 3. Unused/Ground 4. Input (U) 5. Input (V) 6. Power (24V +) 7. Power (24V -) 8. Ground ``` ---
    ✨ Follow-up Questions
    • ⤷ What is the exact input voltage range for the C1 configuration?
    • ⤷ Can this unit be mounted on a standard DIN rail?
    • ⤷ Does the UL certification change the electrical wiring requirements?