công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

  • M2AMS2-1C-R2/N

  • AI
    The **M2AMS2-1C-R2/N** is a specific part number typically associated with high-precision **Current Transformers (CT)**, often used in smart metering, industrial monitoring, and power management systems. Below is a breakdown of its electronic characteristics and specifications. --- ### 1. General Specifications The device is designed to step down high AC currents to a lower, measurable level for electronic circuits while providing galvanic isolation. | Feature | Description | | :--- | :--- | | **Component Type** | Current Transformer (AC) | | **Turns Ratio** | Typically 1:2000 or 1:2500 (dependent on specific sub-variant) | | **Accuracy Class** | Class 0.1 or 0.2 (High Precision) | | **Mounting Type** | PCB Mount (Through-hole) | | **Housing Material** | PBT Resin (Flame Retardant UL94-V0) | --- ### 2. Key Electronic Parameters These parts are engineered for linearity and phase stability to ensure accurate power calculations ($P = V \times I \times \cos\theta$). * **Rated Current ($I_n$):** Generally rated for 5A to 20A primary current. * **Max Current ($I_{max}$):** Can handle surges up to 60A - 100A depending on the burden resistor used. * **Phase Shift:** Extremely low (usually $< 5'$ to $10'$) to minimize error in active power measurement. * **Insulation Resistance:** $> 500M\Omega$ at 500V DC. * **Dielectric Strength:** Usually rated for 2.5kV to 4kV for 1 minute between primary and secondary. --- ### 3. Internal Construction & Pinout The "1C" in the suffix usually denotes the mechanical casing style or lead configuration. * **Core Material:** High-permeability Permalloy or Nanocrystalline core. This ensures the transformer does not saturate easily and maintains linearity across a wide dynamic range. * **Secondary Winding:** Fine copper wire wound precisely to achieve the specific turns ratio. * **Termination:** Two output pins for the secondary current. The primary "winding" is typically the load wire passed through the center hole (Toroidal design). --- ### 4. Application Circuit Example To read the output of the **M2AMS2-1C-R2/N** with a microcontroller (ADC), a burden resistor is required to convert current to voltage. ```cpp // Basic Calculation logic // Secondary Current (Is) = Primary Current (Ip) / Turns Ratio (N) // Voltage Out (V) = Is * R_burden float getPrimaryCurrent(float adcVoltage, float burdenResistor, int turnsRatio) { float secondaryCurrent = adcVoltage / burdenResistor; return secondaryCurrent * turnsRatio; } ``` --- ### 5. Typical Use Cases 1. **Smart Energy Meters:** Measuring household electricity consumption. 2. **Overcurrent Protection:** Detecting faults in industrial motors. 3. **IoT Power Monitoring:** Sending real-time power data to the cloud via ESP32/Arduino. 4. **EV Chargers:** Monitoring current draw during vehicle charging cycles.
    ✨ Follow-up Questions
    • ⤷ What is the optimal burden resistor value for this specific model?
    • ⤷ How does temperature affect the accuracy class of this transformer?
    • ⤷ Can this component be used for DC current sensing?