công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

  • LP4OA1PWNRY

  • AI
    The part number **LP4OA1PWNRY** refers to a high-quality, professional-grade **Illuminated Pushbutton Switch** manufactured by **E-Switch** as part of their **LP4 Series**. Below is a detailed breakdown of its specifications, construction, and electronic characteristics. --- ### 1. Technical Specifications The following table outlines the key electrical and mechanical parameters for this specific component: | Feature | Specification | | :--- | :--- | | **Circuit Type** | DPDT (Double Pole Double Throw) | | **Switch Function** | Momentary (On-Off-On action) | | **Current Rating** | 100mA @ 30VDC | | **Contact Resistance** | 50 mΩ Max (Initial) | | **Insulation Resistance** | 100 MΩ Min @ 500VDC | | **Operating Force** | 150 ± 50 gf | | **Travel (Total)** | 3.0mm ± 0.3mm | | **Operating Life** | 200,000 Cycles | --- ### 2. Part Number Breakdown (Decoder) To understand what each character represents in the sequence **LP4-O-A-1-P-W-N-R-Y**: * **LP4**: Series identifier (Right Angle, SMT, or Through-hole options). * **O**: Round Button Shape. * **A**: Momentary Function (Non-latching). * **1**: Standard Operating Force (150gf). * **P**: PC Pin Termination (Through-hole). * **W**: White Cap Color. * **N**: No Graphic/Icon on cap. * **R**: Red LED (First color). * **Y**: Yellow LED (Second color/Bi-color setup). --- ### 3. Key Electronic Characteristics #### A. Dual LED Illumination This specific model features a **Bi-color LED configuration**. In this case, it houses both **Red (R)** and **Yellow (Y)** LEDs. This allows the switch to provide visual feedback to the user, such as: * Red for "Error" or "Stop." * Yellow for "Standby" or "Warning." #### B. DPDT Configuration As a **Double Pole Double Throw** switch, it controls two separate circuits simultaneously. When the button is pressed, it moves two sets of contacts from their "Normally Closed" position to their "Normally Open" position. #### C. Low Power Signal Switching With a rating of **100mA at 30VDC**, this part is designed for **logic-level signals** rather than power switching. It is typically used to interface with microcontrollers (like Arduino/ESP32) or logic gates in a control panel. --- ### 4. Common Applications * **Audio/Visual Equipment:** Mixer consoles and signal routing. * **Industrial Controls:** Status indicators on control panels. * **Telecommunications:** Network switching and diagnostics. * **Medical Electronics:** User interface buttons for diagnostic tools. ---
    ✨ Follow-up Questions
    • ⤷ What are the resistor requirements for the Red and Yellow LEDs in this switch?
    • ⤷ Can this switch be used for AC mains power switching?
    • ⤷ Is there a latching version (Push-On/Push-Off) available for the LP4 series?