công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

  • LOR34T-R150-G

  • AI
    The **LOR34T-R150-G** is a specialized electronic component, typically categorized as a high-precision, low-resistance shunt resistor. These components are critical in power management systems for monitoring current flow. --- ### 1. Component Identification & Specifications Based on the standard nomenclature for this series, here is the breakdown of its technical characteristics: | Specification | Details | | :--- | :--- | | **Component Type** | Current Sense Shunt Resistor | | **Resistance Value** | 150 mΩ (0.150 Ohms) | | **Tolerance** | Usually ±1% or ±2% (indicated by suffix codes) | | **Construction** | Metal Plate / Alloy technology | | **Termination** | Surface Mount (SMD) | | **RoHS Status** | Compliant (Lead-free) | --- ### 2. Key Internal Features The "LOR" series is engineered for stability under thermal stress. Key electronic attributes include: * **Low TCR (Temperature Coefficient of Resistance):** Designed to maintain a stable resistance value even as the component heats up due to current flow. * **High Power Rating:** Utilizes a metal alloy plate which allows for higher wattage dissipation compared to standard thick-film resistors. * **Low Inductance:** The physical structure minimizes parasitic inductance, making it suitable for high-frequency switching applications. --- ### 3. Functional Applications The LOR34T-R150-G is primarily used in **Current Sensing** circuits. By placing this resistor in series with a load, a small voltage drop is created ($V = I \times R$). This voltage is then measured by an Integrated Circuit (IC) to determine the current. #### Common Use Cases: 1. **Battery Management Systems (BMS):** Monitoring charge and discharge cycles in Li-ion batteries. 2. **DC-DC Converters:** Providing feedback for over-current protection. 3. **Motor Control:** Detecting stalls or regulating torque in small motors. 4. **Power Supplies:** Ensuring efficient power distribution in consumer electronics. --- ### 4. Technical Precautions When integrating this part into a PCB design, consider the following: * **Kelvin Connection (4-Terminal Sensing):** To get the most accurate reading of 150mΩ, it is recommended to use "Kelvin" traces to separate the high-current path from the voltage-sensing path. * **Heat Dissipation:** Ensure adequate copper pour around the pads to act as a heat sink, as shunt resistors convert excess current into heat.
    ✨ Follow-up Questions
    • ⤷ What is the maximum power rating (Watts) for the LOR34T series?
    • ⤷ How do I implement a Kelvin connection for this resistor on a PCB?
    • ⤷ What are the common alternatives to the R150 resistance value in this series?