LCS-5B-R/K
AI

The **LCS-5B-R/K** is a precision load cell signal conditioner (often categorized as a digital indicator or weighing controller) manufactured by **Unipulse**. It is designed to convert low-voltage signals from strain gauge load cells into readable weight data and control outputs.
Below is an explanation of its electronic components and specifications.
---
### 1. Core Electronic Components & Architecture
The device functions through a high-precision analog-to-digital processing chain:
| Component | Function |
| :--- | :--- |
| **Excitation Circuit** | Provides a stable DC voltage (usually 5V or 10V) to the load cell bridge. |
| **Analog Front-End (AFE)** | A high-gain instrumentation amplifier that boosts the mV signal from the load cell. |
| **A/D Converter** | A high-resolution Delta-Sigma converter (typically 24-bit) that digitizes the analog signal. |
| **Microcontroller (MCU)** | Processes the digital signal, handles calibration data, and manages the display. |
| **Output Stage** | Contains opto-isolated transistors or relays for setpoint control (R/K models). |
---
### 2. Technical Specifications
The "R/K" suffix usually denotes specific output configurations (such as Relay or Sink/Source outputs).
| Feature | Specification |
| :--- | :--- |
| **Input Sensitivity** | 0.3 mV/V to 3.0 mV/V |
| **Sampling Rate** | High-speed processing (often up to 100 times/sec) |
| **Display** | 5-digit LED (typically red) for weight visualization |
| **Communication** | Often features RS-232C or RS-485 for PLC/PC interfacing |
| **Power Supply** | AC 100V-240V or DC 24V (depending on the sub-model) |
---
### 3. Wiring and Interface (I/O)
The LCS-5B series uses a specific pinout for the load cell connection to ensure signal integrity:
1. **EXC+ / EXC-**: Positive and Negative Excitation power to the load cell.
2. **SIG+ / SIG-**: Positive and Negative Signal input from the load cell.
3. **SHIELD**: Grounding to prevent Electromagnetic Interference (EMI).
4. **Control I/O**:
* **Inputs**: Zero, Tare, and Start/Stop commands.
* **Outputs**: Limit signals (HI, OK, LO) used for automated filling or weighing.
---
### 4. Key Features for Electronic Integration
* **Digital Filtering:** Electronic noise reduction via software filters to stabilize readings in vibrating environments.
* **Auto-Zero Tracking:** Compensates for electronic drift over time or temperature changes.
* **Watchdog Timer:** An internal electronic circuit that resets the MCU if a software crash occurs, ensuring industrial reliability.
- ⤷
What is the specific pinout diagram for the LCS-5B-R load cell connector?
- ⤷ How do I calibrate the LCS-5B-R using the front panel buttons?
- ⤷ What are the differences between the 'R' and 'K' output versions?