AI

The **HTS-66-R/BL** is a specific type of **illuminated rocker switch** commonly used in industrial panels, power strips, and consumer appliances. It is designed to handle high current while providing visual feedback to the user.
---
### 1. General Specifications
Below are the typical technical parameters associated with this component series:
| Parameter | Specification |
| :--- | :--- |
| **Switch Type** | Rocker Switch |
| **Circuitry** | SPST (Single Pole Single Throw) |
| **Actuator Color** | Red (Translucent) |
| **Body Color** | Black |
| **Illumination** | Neon Lamp (Standard) |
| **Rating (AC)** | 16A 250V AC / 20A 125V AC |
| **Mounting Type** | Snap-in |
| **Terminals** | 3-Pin (Power In, Load Out, Ground/Neutral for Light) |
---
### 2. Electronic Pin Configuration
The "R/BL" designation usually refers to a **Red** actuator in a **Black** housing. Because it is illuminated, it features three terminals rather than two:
1. **Pin 1 (Line/Hot):** Receives the incoming power from the source.
2. **Pin 2 (Load):** Sends power to the device being controlled when the switch is in the "ON" position.
3. **Pin 3 (Neutral/Ground):** This pin is dedicated to completing the circuit for the internal neon lamp. Without connecting this, the switch will function, but it will not light up.
---
### 3. Key Electronic Features
* **Internal Neon Bulb:** Unlike LEDs, these switches usually contain a small neon bulb and a current-limiting resistor. This allows them to operate directly at 110V or 220V AC without needing a separate transformer.
* **Contact Resistance:** Typically less than 50mΩ, ensuring minimal heat generation during high-current operation.
* **Insulation Resistance:** Usually rated at 100MΩ min (at 500V DC) to ensure safety against electrical leaks.
* **Dielectric Strength:** Often rated to withstand 1500V AC for 1 minute between terminals.
---
### 4. Common Applications
* **Power Distribution Units (PDUs):** Used as the main power toggle.
* **Household Appliances:** Coffee makers, heaters, and vacuum cleaners.
* **Industrial Controls:** Panel-mount power indicators for machinery.
---
- ⤷
What is the wiring diagram for the 3-pin illuminated version?
- ⤷ Can this switch be used for DC applications instead of AC?
- ⤷ What are the physical cutout dimensions for the HTS-66-R/BL?