HAP-A1-R
AI

The **HAP-A1-R** is an industrial-grade **Active RFID (Radio Frequency Identification) Tag**, typically manufactured by companies like **Hantest** or used in specific RTLS (Real-Time Locating Systems). It is designed for personnel tracking, asset management, and automated attendance.
Below is a breakdown of its electronic components and technical characteristics.
---
## 1. Core Technical Specifications
The device operates on an active frequency, meaning it contains its own power source and transmitter to broadcast signals autonomously.
| Feature | Specification |
| :--- | :--- |
| **Operating Frequency** | 2.4 GHz ~ 2.5 GHz (ISM Band) |
| **Communication Mode** | Active (Periodic broadcasting) |
| **Read Range** | 0 to 100 meters (Adjustable via reader) |
| **Battery Type** | CR2032 Lithium Button Cell (typically) |
| **Battery Life** | 1.5 to 3 years (Depending on ping interval) |
| **Modulation** | GFSK (Gaussian Frequency Shift Keying) |
---
## 2. Internal Electronic Components
The HAP-A1-R consists of several critical subsystems integrated onto a small PCB:
### A. The Microcontroller (MCU) & RF Transceiver
Most units in this series utilize a **Low-Power SoC (System on Chip)**.
- **Function:** Manages the sleep/wake cycles to preserve battery. It encrypts the Tag ID and coordinates the radio transmission.
- **RF Logic:** Operates in the 2.4GHz spectrum, which allows for high data rates and smaller antenna integration compared to LF or HF tags.
### B. Antenna System
- **Type:** Internal PCB Trace Antenna.
- **Characteristics:** Designed for omnidirectional radiation patterns to ensure the tag can be read regardless of its orientation on a person or asset.
### C. Power Management Circuit
- **LDO Regulator:** Ensures stable voltage to the SoC as the button cell voltage drops over time.
- **Sleep Circuitry:** The device stays in a "Deep Sleep" mode for 99% of the time, waking up only for milliseconds to broadcast its "heartbeat" signal.
### D. User Interface Elements
- **LED Indicator:** Usually a red or green SMD LED to indicate battery status or successful registration.
- **Button (Optional):** Some variants include a panic/SOS button that triggers a specific alarm code in the data packet.
---
## 3. Communication Protocol
The electronic signature of the HAP-A1-R follows a structured data packet format:
1. **Preamble:** Syncs the receiver with the tag's clock.
2. **ID Code:** A unique 4-byte or 8-byte hexadecimal string assigned to the hardware.
3. **Status Byte:** Provides information on battery voltage (Low battery alert) and button triggers.
4. **CRC (Cyclic Redundancy Check):** Ensures data integrity during wireless transmission.
---
## 4. Key Electronic Advantages
* **Anti-Collision:** The internal logic includes a "collision avoidance" algorithm, allowing a single reader to identify hundreds of HAP-A1-R tags simultaneously.
* **Low Power Consumption:** Uses ultra-low-current electronics, often consuming less than **1µA** in standby mode.
* **Adjustable Power:** The transmission power can often be configured electronically to limit the range for high-density environments.
- ⤷
What is the specific maximum transmission power of the HAP-A1-R?
- ⤷
How do you replace the battery in a HAP-A1-R tag without damaging the seal?
- ⤷
Can the HAP-A1-R be programmed with custom ID data using an external writer?