AI

## Electronic Specifications of the FYA-R2010ZX-2
The **FYA-R2010ZX-2** is a specific model of a **10-Segment LED Bargraph Display**. These components are widely used to display levels (such as audio volume, battery life, or signal strength) in a linear visual format.
---
### 1. Key Technical Specifications
Based on standard datasets for the FYA series (where "Z" often denotes a specific color code, commonly Green or Yellow-Green), here are the typical electronic characteristics:
| Parameter | Typical Value | Unit |
| :--- | :--- | :--- |
| **Number of Segments** | 10 | LEDs |
| **Circuit Configuration** | Common Cathode / Individual Anodes | - |
| **Forward Voltage ($V_f$)** | 2.0 - 2.4 (per segment) | Volts |
| **Forward Current ($I_f$)** | 20 | mA |
| **Peak Forward Current** | 100 (1/10 duty cycle) | mA |
| **Power Dissipation** | 100 | mW per segment |
| **Operating Temperature** | -40 to +85 | °C |
---
### 2. Physical & Pin Configuration
The device is housed in a standard **20-pin Dual In-line Package (DIP)**.
* **Pin Layout:** Usually, one side (Pins 1–10) corresponds to the Anodes of the 10 segments, while the opposite side (Pins 11–20) corresponds to the Cathodes.
* **Segment Size:** Each LED rectangular bar is typically **2.0mm x 5.0mm**.
* **Dimensions:** The overall package usually measures approximately **25.4mm x 10.1mm**.
---
### 3. Electronic Driving Methods
To operate this part effectively, the following electronic principles apply:
* **Current Limiting:** Since LEDs are current-driven devices, you **must** use a series resistor for each segment to prevent burnout.
* *Formula:* $R = (V_{supply} - V_f) / I_f$
* **Driving ICs:** This part is frequently paired with ICs like the **LM3914** (Dot/Bar Display Driver), which handles the voltage comparison and current regulation automatically.
* **Multiplexing:** If using a microcontroller (like Arduino or ESP32) with limited pins, you can use a **74HC595 Shift Register** to control all 10 segments using only 3 GPIO pins.
---
### 4. Part Number Breakdown (FYA Series)
Understanding the nomenclature helps identify variations:
* **FYA:** Manufacturer series code (Forvard/Foryard Optoelectronics).
* **R2010:** Refers to the physical size and the 10-segment count.
* **ZX:** Color and Material code (e.g., GaP/GaAlAs for different shades of Green/Red).
* **-2:** Specific design revision or polarity indicator.
- ⤷
What is the exact color of the 'ZX' variant in this model?
- ⤷ Can this bargraph be driven directly from a 5V microcontroller pin?
- ⤷ What is the recommended resistor value for 5V operation?