FPM3022H-R010FKR
AI

The **FPM3022H-R010FKR** is a high-precision, automotive-grade current sense resistor, typically manufactured by Isabellenhütte (part of the FPM series). These components are critical in power electronics for monitoring current flow with minimal energy loss.
---
### ## Technical Specifications
Below is a breakdown of the key electronic characteristics for this specific part number:
| Parameter | Specification |
| :--- | :--- |
| **Resistance Value** | 10 mΩ (0.010 Ω) |
| **Power Rating** | Up to 3W (depending on mounting/heatsink) |
| **Tolerance** | ±1.0% (denoted by 'F' in the suffix) |
| **Temperature Coefficient** | < 30 ppm/K |
| **Operating Temp Range** | -65°C to +175°C |
| **Material** | Manganin (Resistive element) |
| **Package Size** | 3022 (Metric) |
---
### ### Key Electronic Features
1. **Low Inductance:**
The design minimizes parasitic inductance (typically < 3 nH). This is essential for high-frequency switching applications where rapid current changes occur.
2. **High Stability:**
Using Manganin alloy allows the resistor to maintain its value even under significant thermal stress, ensuring long-term measurement accuracy.
3. **Pulse Power Handling:**
The FPM series is engineered to withstand high transient power surges, making it suitable for motor startup currents or battery inrush scenarios.
4. **Kelvin Connection (4-Terminal) Capability:**
While the physical package is often two terminals, the internal architecture is optimized for 4-wire sensing to eliminate the resistance of the leads and solder joints from the measurement.
---
### ### Common Applications
The FPM3022H series is widely used in the following circuits:
* **BMS (Battery Management Systems):** Monitoring charge and discharge cycles in electric vehicles (EVs).
* **DC/DC Converters:** Providing feedback loops for current regulation.
* **Electronic Power Steering (EPS):** Sensing motor current for precise torque control.
* **Inverters:** Protecting power modules from overcurrent conditions.
---
### ### Equivalent Circuit Representation
In a simulation or schematic, the part is modeled as a resistor in series with a very small inductor:
```spice
* SPICE Model Representation
R1 Node1 Node2 0.010 ; 10mOhm Resistance
L1 Node1 Node2 2n ; ~2nH Parasitic Inductance
```
- ⤷
What are the PCB layout recommendations for 10mOhm sense resistors to avoid measurement error?
- ⤷ How does the 'H' suffix in the part number affect the power rating compared to standard versions?
- ⤷ What are the primary differences between Manganin and Aluchrom resistive elements?