công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

  • FJT-06-R/Q

  • AI
    Based on the part number **FJT-06-R/Q**, this component belongs to a specific category of **Push-Button Switches** or **Tactile Switches**, commonly used in consumer electronics, automotive dashboards, and industrial controls. Below is a breakdown of the electronic specifications and characteristics associated with this series. --- ## 1. General Specifications The FJT series is typically designed for low-current signal switching. The "/Q" usually denotes specific packaging or lead-free/RoHS compliance markers. | Feature | Specification (Typical) | | :--- | :--- | | **Circuit Type** | SPST (Single Pole Single Throw) | | **Switch Function** | Momentary (Normally Open) | | **Contact Rating** | 50mA @ 12V DC | | **Contact Resistance** | < 100 mΩ | | **Insulation Resistance** | > 100 MΩ @ 100V DC | | **Dielectric Strength** | 250V AC for 1 minute | | **Operating Force** | 160gf to 260gf (depending on sub-model) | --- ## 2. Structural Characteristics The physical design of the FJT-06 series is optimized for high-density PCB mounting. * **Form Factor:** Often a 6x6mm square base. * **Mounting Type:** Through-hole (DIP) or Surface Mount (SMD) depending on the suffix. The "06" generally refers to the 6mm dimension. * **Actuator:** Usually a round plunger. The height of this plunger can vary significantly (from 4.3mm to 9.5mm). * **Termination:** Reinforced terminals to ensure stability during manual or wave soldering. --- ## 3. Terminal Configuration The **FJT-06-R** specifically refers to the terminal layout and orientation. * **R-Type:** Usually indicates a **Right-Angle** mount. This allows the button to be pressed from the side of the PCB (perpendicular to the board), which is ideal for edge-mounted controls on devices. * **Q-Type:** Often refers to specific **Packaging** (such as Tape and Reel or specific bulk bag quantities) or high-quality silver-plated contacts. --- ## 4. Typical Applications These parts are found in virtually any interface requiring user feedback: 1. **Consumer Electronics:** Volume buttons, power switches on small appliances. 2. **Peripherals:** Computer mice, keyboards, and printer control panels. 3. **Industrial:** Reset switches on internal circuit boards. --- ## 5. Equivalent/Reference Diagrams ```text [ Actuator ] +----------+ | Switch | <--- 6mm Width | Body | +--[Pins]--+ | | (Right Angle Pins for FJT-06-R) ```
    ✨ Follow-up Questions
    • ⤷ What is the exact actuator height for the FJT-06-R variant?
    • ⤷ Can this switch handle AC voltage applications?
    • ⤷ What are the common failure modes for tactile switches in this series?