E3JK-R4
AI

The **E3JK-R4** series (specifically the E3JK-R4M1 and its variations) is a popular long-distance **Retro-reflective Photoelectric Sensor** manufactured by Omron. It is widely used in industrial automation due to its ability to operate on both AC and DC voltages.
---
## 1. Core Specifications
The electronic architecture of the E3JK-R4 is designed for versatility. Below are the primary technical parameters:
| Parameter | Specification |
|:---|:---|
| **Sensing Method** | Retro-reflective (requires a reflector) |
| **Sensing Distance** | Typically 2.5m to 7m (depending on the reflector used) |
| **Supply Voltage** | 24 to 240 VAC / 24 to 240 VDC (Universal) |
| **Output Type** | Relay Output (SPDT - Single Pole Double Throw) |
| **Current Consumption** | 2W or less |
| **Response Time** | 20 ms maximum |
| **Light Source** | Infrared LED (950 nm) or Red LED |
---
## 2. Key Electronic Components
### A. The Optical Emitter & Receiver
* **Emitter:** Uses an Infrared or Visible Red LED. It pulses light at a specific frequency to prevent interference from ambient light (like sunlight or factory lamps).
* **Receiver:** A phototransistor or photodiode tuned to the same frequency as the emitter. If the light beam is broken by an object, the receiver triggers the internal circuitry.
### B. Power Supply Circuitry
The "Universal Voltage" feature is achieved via an internal **Switch Mode Power Supply (SMPS)** or a wide-input regulator. This allows the sensor to accept a range of 24V to 240V without needing a separate transformer.
### C. Output Relay
Unlike NPN/PNP sensors that use transistors, the E3JK-R4 contains a **mechanical relay**.
* **Capacity:** Usually rated for 3A at 250 VAC.
* **Flexibility:** Because it is a "dry contact" relay, it can switch a different voltage than the one powering the sensor.
---
## 3. Wiring Diagram (5-Wire Configuration)
The sensor typically uses a 5-core cable. The internal electronic paths are mapped as follows:
| Wire Color | Function | Description |
|:---|:---|:---|
| **Brown** | Power (L/+) | Connect to 24-240V Supply |
| **Blue** | Power (N/-) | Connect to 24-240V Supply |
| **White** | Relay Common (COM) | The "Input" side of the switch |
| **Black** | Normally Open (NO) | Closes when an object is detected |
| **Gray** | Normally Closed (NC) | Opens when an object is detected |
---
## 4. Operation Logic
The E3JK-R4 operates on the **Retro-reflective** principle:
1. The emitter sends light to a reflector (e.g., E39-R1).
2. The light bounces back to the receiver.
3. **Light-ON / Dark-ON:** Most models have a switch to choose the logic:
* **Dark-ON:** The relay activates when an object blocks the beam (Interruption).
* **Light-ON:** The relay activates when the beam is clear (Reflecting).
---
## 5. Built-in Protections
* **Mutual Interference Prevention:** Allows two sensors to be placed near each other without triggering each other.
* **IP64/IP66 Rating:** The electronic housing is sealed against dust and water splashes, making it suitable for harsh industrial environments.
- ⤷
What is the difference between E3JK-R4M1 and E3JK-R4M2 models?
- ⤷ Can I use an E3JK-R4 sensor without a reflector?
- ⤷ How do I troubleshoot a sensor that stays 'ON' even when no object is present?