DM05DE151DO3-SA-R02
AI

Based on the part number **DM05DE151DO3-SA-R02**, this component belongs to the **Mica Capacitor** family, typically manufactured by companies like **Cornell Dubilier (CDE)** or similar high-precision specialists.
---
## 1. Technical Specifications Breakdown
The alphanumeric code represents specific physical and electrical characteristics. Here is the breakdown:
| Characteristic | Value / Meaning | Description |
| :--- | :--- | :--- |
| **Series** | **DM05** | Standard dipped mica case size (Miniature). |
| **Temp. Coefficient** | **DE** | Characteristic E (-20 to +100 ppm/°C). |
| **Capacitance** | **151** | **150 pF** (15 followed by one zero). |
| **Tolerance** | **D** | **±0.5 pF** (Ultra-tight tolerance). |
| **Voltage** | **O3** | Typically **300V or 500V** rating (depending on series table). |
| **Operating Temp** | **-S** | Standard range (usually up to 125°C or 150°C). |
| **Packaging** | **A-R02** | Bulk or Ammo pack with specific lead spacing/forming. |
---
## 2. Key Attributes of Mica Capacitors
Mica capacitors are chosen for high-performance applications where stability is critical.
* **Extreme Stability:** They exhibit very little change in capacitance over time or varying temperatures.
* **High Q Factor:** They have very low losses (low ESR), making them ideal for high-frequency (RF) applications.
* **Precision:** The "D" tolerance (±0.5 pF) indicates this is a precision component used in tuned circuits.
* **Voltage Handling:** Despite their small size, they handle high voltages and dV/dt (voltage spikes) very well.
---
## 3. Common Applications
Due to the **150pF** value and high stability, this part is likely found in:
1. **RF Oscillators:** Used to set a precise frequency in radio transmitters or receivers.
2. **Filter Networks:** Used in band-pass or low-pass filters where the cutoff frequency must not drift.
3. **Snubber Circuits:** Small-scale snubbing in high-speed pulse applications.
4. **Audio Equipment:** High-end audio gear where "silver mica" is preferred for its linear sound characteristics.
---
## 4. Equivalent Substitution Guide
If searching for a replacement, ensure the following parameters match or exceed the original:
```markdown
1. Type: Silver Mica (Dipped)
2. Capacitance: 150 pF
3. Tolerance: ±0.5 pF (Do not use ±5% or ±10% if precision is required)
4. Voltage: Minimum 500V (Commonly used safety margin)
5. Lead Spacing: 0.120" or 0.200" (Check physical dimensions)
```
- ⤷
What is the exact voltage rating for the O3 code in the DM05 series?
- ⤷ Can I replace a silver mica capacitor with a ceramic C0G/NP0 type?
- ⤷ What are the physical dimensions of a DM05 case size?