AI

## CFAH1602A-RBC-JP Electronic Specifications
The **CFAH1602A-RBC-JP** is a 16x2 Character LCD module manufactured by Crystalfontz. This specific model is known for its **Red** backlight and **STN Negative Blue** display technology, creating a high-contrast appearance with red characters on a dark blue/black background.
---
### 1. Key Technical Specifications
| Feature | Specification |
| :--- | :--- |
| **Display Format** | 16 Characters x 2 Lines |
| **Controller** | Sitronix ST7066U (HD44780 compatible) |
| **Interface** | 4-bit or 8-bit Parallel |
| **Backlight Type** | LED (Red) |
| **Display Mode** | STN Negative, Transmissive (Blue) |
| **Supply Voltage ($V_{DD}$)** | 5.0V (Standard) |
| **Logic Voltage ($V_{IO}$)** | 3.3V to 5.0V |
| **Operating Temp** | -20°C to +70°C |
---
### 2. Pinout Configuration
The module uses a standard 16-pin interface common to most character LCDs.
| Pin | Symbol | Function |
| :--- | :--- | :--- |
| 1 | VSS | Ground (0V) |
| 2 | VDD | Power Supply (+5V) |
| 3 | VO | Contrast Adjustment (via Potentiometer) |
| 4 | RS | Register Select (Low=Instruction, High=Data) |
| 5 | R/W | Read/Write (Low=Write, High=Read) |
| 6 | E | Enable Signal (Latch data on falling edge) |
| 7-14 | DB0-DB7 | Data Bus (DB0-DB3 not used in 4-bit mode) |
| 15 | LED+ | Backlight Anode (+5V via resistor) |
| 16 | LED- | Backlight Cathode (Ground) |
---
### 3. Critical Electronic Notes
#### A. Contrast Control ($V_O$)
To make the text visible, Pin 3 ($V_O$) must be connected to a variable voltage. Usually, a **10kΩ potentiometer** is connected between $V_{DD}$ and $V_{SS}$, with the wiper connected to Pin 3. Adjusting this changes the liquid crystal driving voltage.
#### B. Backlight Current Limiting
While some versions of this board include an onboard resistor, it is standard practice to use an external resistor on Pin 15 ($LED+$) to prevent burning out the Red LEDs.
* **Typical Forward Voltage ($V_f$):** ~2.1V to 2.5V (for Red LEDs).
* **Max Current:** ~100mA (refer to the specific datasheet revision for exact limits).
#### C. Controller Compatibility
The integrated **ST7066U controller** is instruction-set compatible with the industry-standard **Hitachi HD44780**. This means it works out-of-the-box with the Arduino `LiquidCrystal` library.
---
### 4. Basic Connection Example (Arduino)
```cpp
#include
// initialize the library with the numbers of the interface pins
// RS, E, D4, D5, D6, D7
LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
void setup() {
lcd.begin(16, 2);
lcd.print("Hello, Red LCD!");
}
void loop() {
// Cursor to column 0, line 1
lcd.setCursor(0, 1);
lcd.print(millis() / 1000);
}
```
- ⤷
What is the maximum current draw for the Red LED backlight?
- ⤷ How do I calculate the resistor value for Pin 15 if using a 5V supply?
- ⤷ Does this module support custom character generation (CGRAM)?