AI

The **CFAG1602A-RMC-JP** is a character Liquid Crystal Display (LCD) module manufactured by Crystalfontz. It is a 16x2 display (16 characters per row, 2 rows) known for its distinctive red background and white characters.
Below is the technical breakdown of its electronic components and specifications.
---
## 1. Core Technical Specifications
| Parameter | Specification |
| :--- | :--- |
| **Display Type** | STN Negative, Red, Transmissive |
| **Format** | 16 Characters x 2 Lines |
| **Built-in Controller** | Sitronix ST7066U (or equivalent HD44780 compatible) |
| **Interface** | 4-bit or 8-bit Parallel |
| **Backlight** | Red LED |
| **Input Voltage (VDD)** | 5.0V (Typical) |
---
## 2. Electronic Interface (Pinout)
The module uses a standard 16-pin interface. The pins handle power, contrast adjustment, data transmission, and backlight control.
| Pin No. | Symbol | Function | Description |
| :--- | :--- | :--- | :--- |
| 1 | VSS | Ground | 0V |
| 2 | VDD | Supply Voltage | +5.0V for Logic |
| 3 | VO | Contrast Adj. | External variable resistor input |
| 4 | RS | Register Select | High: Data; Low: Instruction |
| 5 | R/W | Read/Write | High: Read; Low: Write |
| 6 | E | Enable | Enable Signal (Falling edge trigger) |
| 7-14 | DB0-DB7 | Data Bus | Bi-directional 8-bit Data Bus |
| 15 | A (LED+) | Backlight Anode | Power for Red LED (+5V via resistor) |
| 16 | K (LED-) | Backlight Cathode | Ground for Red LED |
---
## 3. The Controller (ST7066U)
The "brain" of this module is the **ST7066U** dot-matrix LCD controller. It is a industry-standard chip that provides:
* **Character Generator ROM (CGROM):** Contains the standard ASCII character set plus Japanese (Katakana) symbols, indicated by the `-JP` suffix in the part number.
* **Character Generator RAM (CGRAM):** Allows the user to define up to 8 custom icons or symbols.
* **Display Data RAM (DDRAM):** Stores the character codes displayed on the screen.
---
## 4. Key Electronic Characteristics
### Power Consumption
* **Logic Current:** ~1.2mA to 2.0mA.
* **Backlight Current:** Typically 100mA @ 5V. It is crucial to use a current-limiting resistor if one is not integrated on your driving board to prevent burning out the LEDs.
### Optical Characteristics
Because this is a **Transmissive** display, the backlight must be turned **ON** to see the characters. In a powered-off state or without a backlight, the screen will appear very dark/black.
---
## 5. Typical Connection Diagram
```cpp
// Example: Connecting to an Arduino (using LiquidCrystal library)
// RS Pin to Digital 12
// Enable Pin to Digital 11
// D4, D5, D6, D7 to Digital 5, 4, 3, 2
#include
const int rs = 12, en = 11, d4 = 5, d5 = 4, d6 = 3, d7 = 2;
LiquidCrystal lcd(rs, en, d4, d5, d6, d7);
void setup() {
lcd.begin(16, 2);
lcd.print("Hello, Red LCD!");
}
void loop() {}
```
---
- ⤷
What is the recommended value for the contrast adjustment potentiometer (VO)?
- ⤷ How does the 'JP' version differ from the standard 'NYG' or 'YYH' versions?
- ⤷ Can this display be operated at 3.3V logic?