CFAG1602A-RGI-JP
AI

The **CFAG1602A-RGI-JP** is a character Liquid Crystal Display (LCD) module manufactured by Crystalfontz. It is a 16x2 display (16 characters per row, 2 rows) known for its specific visual properties and industrial-standard interface.
Below is a detailed breakdown of its electronic components and specifications.
---
### 1. General Specifications
| Feature | Specification |
| :--- | :--- |
| **Display Format** | 16 Characters x 2 Lines |
| **LCD Type** | FSTN, Negative, Transmissive |
| **Backlight** | Green LED |
| **Controller** | Sitronix ST7066U (or equivalent) |
| **Interface** | 4-bit or 8-bit Parallel |
| **Driving Method** | 1/16 Duty, 1/5 Bias |
---
### 2. Electronic Hardware Components
#### A. The Controller (ST7066U)
The heart of the module is the **ST7066U** dot-matrix LCD controller.
- It handles the character generation (CGROM) and display data RAM (DDRAM).
- It is instruction-compatible with the industry-standard HD44780.
- It translates data sent from a microcontroller (like Arduino or ESP32) into the specific pixel patterns seen on the screen.
#### B. The LCD Glass (FSTN Negative)
- **FSTN (Film-compensated Super-Twisted Nematic):** This technology provides better contrast and wider viewing angles than standard STN displays.
- **Negative Mode:** The background is dark, and the characters are illuminated by the backlight.
#### C. LED Backlight
- The "RG" in the part number refers to the **Green** color of the backlight.
- It typically requires a current-limiting resistor to prevent burnout if the driving voltage exceeds the forward voltage ($V_f$).
---
### 3. Pinout Configuration
The module uses a standard 16-pin interface.
| Pin | Symbol | Function |
| :--- | :--- | :--- |
| 1 | VSS | Ground (0V) |
| 2 | VDD | Supply Voltage (+5V typically) |
| 3 | VO | Contrast Adjustment (via Potentiometer) |
| 4 | RS | Register Select (Command/Data) |
| 5 | R/W | Read/Write Select |
| 6 | E | Enable Signal |
| 7-14 | DB0-DB7 | Data Bus lines |
| 15 | A (LED+) | Backlight Anode (+) |
| 16 | K (LED-) | Backlight Cathode (-) |
---
### 4. Electrical Characteristics
To operate this part safely, the following parameters must be observed:
* **Supply Voltage ($V_{DD}$):** 4.7V to 5.3V (Standard 5V operation).
* **Supply Current ($I_{DD}$):** Approximately 1.2mA to 2.0mA (excluding backlight).
* **Backlight Forward Voltage ($V_f$):** Typically 3.0V to 3.5V for the Green LED.
* **Backlight Forward Current ($I_{f}$):** Typically 20mA to 40mA.
---
### 5. Implementation Note
When connecting this to a microcontroller, you must use a **10k Ohm Potentiometer** connected to Pin 3 (VO). By varying the voltage between 0V and $V_{DD}$ on this pin, you control the "darkness" of the pixels to ensure the text is visible against the background.
---
- ⤷
What is the difference between 4-bit and 8-bit parallel modes for this controller?
- ⤷ How do I calculate the correct resistor value for the Green LED backlight?
- ⤷ Can this module be operated at 3.3V instead of 5V?