CDBKB455KCAY07-R0
AI

The **CDBKB455KCAY07-R0** is a specific surface-mount ceramic discriminator manufactured by **Murata Electronics**. It is primarily used in communication equipment for FM detection.
### 1. Component Overview
Ceramic discriminators are resonant devices that convert frequency changes into voltage changes. This specific model belongs to the **CDBKB** series, designed to work with integrated circuits (ICs) for FM demodulation.
---
### 2. Technical Specifications
Below are the key electronic characteristics of the CDBKB455KCAY07-R0:
| Parameter | Specification |
| :--- | :--- |
| **Center Frequency (fo)** | 455 kHz |
| **Demodulation Output** | ≥ 30 mV (at fo ± 4.0 kHz) |
| **Distortion Factor** | ≤ 2.0% |
| **Mounting Type** | Surface Mount (SMD) |
| **Operating Temperature** | -20°C to +80°C |
| **Dimensions** | 5.2 x 4.5 x 1.5 mm |
| **Packaging** | Tape & Reel (R0 suffix) |
---
### 3. Electronic Functions
* **FM Demodulation:** Its core role is to act as the frequency-selective element in an FM detector circuit. When paired with a compatible FM IF IC, it enables the extraction of audio signals from a 455 kHz Intermediate Frequency (IF).
* **LC Replacement:** In modern electronics, these ceramic units replace traditional LC (Inductor-Capacitor) tuned circuits because they require no manual adjustment and offer higher stability.
* **Impedance Matching:** The internal ceramic structure is tuned to provide a specific phase-shift characteristic at the center frequency, which the IC interprets as the "zero point" for audio recovery.
---
### 4. Circuit Implementation
In a typical application, the discriminator is connected to the quadrature detector pins of an FM receiver IC.
```c
// Typical Connection Schematic (Simplified)
[ FM IF IC ]
|
|-- Pin: Quadrature Input <--> [ CDBKB455KCAY07-R0 ]
|-- Pin: Ground <--> [ Ground ]
|
[ Audio Output ]
```
### 5. Part Number Breakdown
* **CDB:** Ceramic Discriminator.
* **KB:** Series code (SMD type).
* **455:** Center Frequency (455 kHz).
* **KCAY07:** Internal design code/characteristics (tolerance and bandwidth).
* **R0:** Packaging code (180mm diameter plastic tape & reel).
---
- ⤷
What are the compatible FM IF ICs for this ceramic discriminator?
- ⤷ How does a ceramic discriminator differ from a ceramic filter?
- ⤷ What are the soldering precautions for SMD ceramic components?