AVH-25LSFE301604
AI

The part number **AVH-25LSFE301604** refers to a high-performance **Aluminum Electrolytic Capacitor**, typically categorized under SMD (Surface Mount Device) or "V-Chip" types. These components are essential for power management and signal filtering in electronic circuits.
### 1. Technical Specifications Breakdown
The alphanumeric code represents specific parameters defined by the manufacturer (often associated with brands like **AiSHi** or similar high-reliability electronic component producers).
| Parameter | Value / Description |
| :--- | :--- |
| **Series** | AVH (High Temperature, Long Life Series) |
| **Voltage Rating** | 25V (Maximum DC operating voltage) |
| **Capacitance** | Often 160µF or 300µF (depending on specific manufacturer suffix mapping) |
| **Mounting Type** | SMD / SMT (Surface Mount) |
| **Operating Temp** | Usually -40°C to +105°C or +125°C |
| **Tolerance** | ±20% (Standard for electrolytic capacitors) |
---
### 2. Key Electronic Features
The **AVH Series** is designed for demanding environments, featuring:
* **Low ESR (Equivalent Series Resistance):** Minimizes heat generation and power loss during high-frequency operation.
* **High Ripple Current Handling:** Capable of managing significant fluctuations in current, which is vital for DC-DC converters.
* **Vibration Resistance:** The "V-Chip" design provides physical stability on the PCB, making it suitable for automotive or industrial machinery.
* **Long Life Cycle:** Rated for several thousand hours at its maximum temperature limit (e.g., 2000–5000 hours).
---
### 3. Common Applications
These parts are integrated into various electronic systems where space is limited but reliability is critical:
1. **Automotive Electronics:** Used in Engine Control Units (ECUs), infotainment systems, and ADAS sensors.
2. **Power Supplies:** Acts as a smoothing filter to convert pulsating DC into a steady voltage.
3. **Industrial Automation:** Found in PLC (Programmable Logic Controller) boards and motor drivers.
4. **Telecommunications:** Used in base stations and networking hardware for power regulation.
---
### 4. Handling and Soldering
When working with the AVH-25LSFE301604, ensure adherence to standard Reflow Soldering profiles:
```markdown
- Pre-heat: 150°C to 180°C (60-120 seconds)
- Peak Temperature: 245°C to 260°C (Maximum 5-10 seconds)
- Polarity: Must observe the cathode (-) stripe to avoid component failure or explosion.
```
- ⤷
What is the exact capacitance value for the '301604' suffix in this series?
- ⤷ How does the ESR of the AVH series compare to standard electrolytic capacitors?
- ⤷ Are there specific storage requirements to prevent electrolyte dry-out for this part?