The **ATS-20F-101-C3-R0** is a specific electronic component manufactured by **Advanced Thermal Solutions (ATS)**. It is a high-performance heat sink designed for cooling electronic components such as CPUs, GPUs, FPGAs, or power modules. --- ### 1. Key Technical Specifications The part number follows a specific nomenclature used by ATS to describe its physical and thermal characteristics. | Feature | Specification | | :--- | :--- | | **Manufacturer** | Advanced Thermal Solutions (ATS) | | **Product Type** | Heat Sink | | **Material** | Aluminum | | **Finish** | Blue Anodized | | **Attachment Method** | pushPIN™ (Spring-loaded pins) | | **Dimensions (L x W)** | 45mm x 45mm | | **Height** | 30mm | | **Thermal Resistance** | Approx. 6.77° C/W (@ 200 LFM) | --- ### 2. Design and Components This part is not a standalone "electronic" circuit but a thermal management component essential for electronic stability. * **Fin Profile (Straight Fin):** The "F" in the part number indicates a straight fin design. This is optimized for airflow directed through the fins, providing a large surface area for heat dissipation. * **pushPIN™ Attachment:** The assembly includes a specific attachment mechanism consisting of: 1. **Plastic/Brass Pins:** To secure the sink to the PCB. 2. **Compression Springs:** To provide consistent "Force" (Pressure) on the component, ensuring high thermal contact. * **Thermal Interface Material (TIM):** This specific model typically comes with **T412** thermal tape or a pre-applied phase-change material to bridge the microscopic air gaps between the chip and the aluminum. --- ### 3. Application Use Cases This component is used in environments where heat buildup can cause "thermal throttling" or hardware failure: * **Telecommunications:** Cooling high-speed networking chips. * **Embedded Systems:** Industrial PCs where fan-less or forced-air cooling is required. * **Power Electronics:** Dissipating heat from voltage regulators or motor drivers. --- ### 4. Part Number Breakdown Understanding the code `ATS-20F-101-C3-R0`: * **ATS-20:** Series identifier. * **F:** Straight Fin geometry. * **101:** Dimensional code (45x45mm). * **C3:** Material/Color code (Aluminum / Blue Anodized). * **R0:** Revision or packaging indicator.