The **ATS-10B-06-C1-R0** is a high-performance electronic thermal management component, specifically an **Advanced Thermal Solutions (ATS) push-pin heatsink**. It is designed to cool electronic components like CPUs, GPUs, or FPGAs on a Printed Circuit Board (PCB). --- ### 1. Technical Specifications The part number provides specific details about its construction and thermal capabilities: | Feature | Specification | | :--- | :--- | | **Manufacturer** | Advanced Thermal Solutions Inc. | | **Heat Sink Type** | Push-Pin (Spring Loaded) | | **Material** | Aluminum | | **Finish** | Blue Anodized | | **Dimensions** | 45mm x 45mm x 25mm | | **Thermal Resistance** | 14.88°C/W (Unducted Flow) | | **Attachment Method** | Push-Pin with Brass Springs | | **Thermal Interface** | T766 (Pre-applied Phase Change Material) | --- ### 2. Design and Engineering Features #### A. High-Performance Fin Geometry The "10B" series features **Straight Fins** designed for high airflow environments. The spacing between the fins is optimized to minimize pressure drop while maximizing the surface area available for heat dissipation. #### B. Attachment Mechanism The **R0** suffix indicates a specific attachment kit: * **Push-Pins:** These provide a secure mechanical connection to the PCB via pre-drilled holes. * **Brass Springs:** Ensure consistent pressure (clamping force) between the heatsink base and the chip, which is critical for efficient heat transfer. #### C. Thermal Interface Material (TIM) The unit comes with **T766 phase-change material** pre-applied to the base. When the electronic component heats up, this material softens and fills microscopic air gaps between the component and the heatsink, significantly reducing thermal resistance. --- ### 3. Application Use Cases This part is typically found in: * **Networking Equipment:** High-speed routers and switches. * **Embedded Systems:** Industrial PCs and automation controllers. * **Power Electronics:** Cooling MOSFET arrays or power modules. --- ### 4. Part Number Breakdown (Nomenclature) `ATS-10B-06-C1-R0` * **ATS:** Advanced Thermal Solutions (Manufacturer). * **10B:** Series (Straight Fin design). * **06:** Fin Pitch/Density designation. * **C1:** Material/Finish (Blue Anodized Aluminum). * **R0:** Attachment Kit version. ---