ATS-06B-63-C2-R0
AI

The **ATS-06B-63-C2-R0** is a high-performance electronic thermal management component, specifically a **Heat Sink** manufactured by Advanced Thermal Solutions (ATS). It is designed to dissipate heat from electronic components like CPUs, GPUs, or high-power transistors.
---
### 1. Technical Specifications
Below are the primary physical and thermal characteristics of this part:
| Parameter | Specification |
| :--- | :--- |
| **Manufacturer** | Advanced Thermal Solutions (ATS) |
| **Part Number** | ATS-06B-63-C2-R0 |
| **Material** | Aluminum |
| **Finish** | Blue Anodized |
| **Attachment Method** | pushPIN™ (Spring-loaded) |
| **Dimensions (L x W x H)** | 40mm x 40mm x 20mm |
| **Thermal Resistance** | 2.85°C/W (at 100 LFM) |
| **Fin Style** | Straight Fin (Cross-cut) |
---
### 2. Key Electronic Features
#### A. pushPIN™ Attachment System
This part utilizes a specific "pushPIN" mechanism. In electronic assembly, this replaces messy adhesives or permanent solder. It uses a flexible spring-loaded pin that passes through pre-drilled holes in the PCB, ensuring constant pressure between the heat sink and the electronic component for optimal heat transfer.
#### B. Thermal Interface Material (TIM)
The "C2" in the part number usually indicates that the heat sink comes pre-applied with a **T766 phase change material** or a high-quality thermal grease. This fills microscopic air gaps between the component die and the aluminum base to reduce thermal impedance.
#### C. Aerodynamic Design
The straight-fin design is optimized for **forced air cooling** (active cooling via fans). The spacing between the fins is engineered to minimize pressure drop while maximizing the surface area exposed to the airflow.
---
### 3. Applications
This specific heat sink size (40x40mm) is commonly used in:
* **Networking Equipment:** Routers, switches, and high-speed gateways.
* **Embedded Systems:** Industrial PCs and Single Board Computers (SBCs).
* **Power Supplies:** Cooling MOSFETs and voltage regulators.
* **Telecommunications:** Base station signal processors.
---
- ⤷
What is the difference between blue anodized and black anodized heat sinks?
- ⤷ How do I calculate the required LFM (Linear Feet per Minute) for this heat sink?
- ⤷ Can the pushPIN attachment be used on any standard PCB?