công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

  • 8502SHO2V02S_V01

  • AI
    The **8502SHO2V02S** is a specific model of an AC magnetic contactor from the NEMA Type S line, manufactured by Schneider Electric (Square D). This device is an electromechanical switch used for controlling electric motors and large power loads. Below is a breakdown of its electronic and electromechanical components. --- ## 1. Technical Specifications Overview This contactor is designed for heavy-duty industrial applications where high reliability and durability are required. | Feature | Specification | | :--- | :--- | | **Product Type** | NEMA Magnetic Contactor | | **NEMA Size** | Size 0 (18 Amperes) | | **Poles** | 3-Pole (3-Phase) | | **Control Voltage** | 120V AC @ 60Hz / 110V AC @ 50Hz | | **Enclosure Type** | Open (No separate metal/plastic box) | | **Coil Suffix (V02S)** | 120V AC Control Circuit with Separate Control | --- ## 2. Key Electronic & Mechanical Parts ### A. The Electromagnetic Coil (V02) The "V02" designation identifies the specific coil voltage. * **Function:** When energized with 120V AC, it creates a magnetic field that pulls the armature down. * **Material:** Copper windings insulated by a high-temperature resin. * **Current Draw:** It has an "inrush" current (to pull the contacts shut) and a lower "sealed" current (to hold them shut). ### B. Power Contacts (3 Poles) * **Composition:** Silver-cadmium oxide alloy. This material is chosen for its conductivity and resistance to "welding" under high heat/arcing. * **Action:** Double-break contacts, meaning the circuit is broken in two places per pole to extinguish the electrical arc faster. ### C. Armature and Magnet Frame * **Core:** Laminated steel plates. Laminations are used to reduce "eddy current" losses and heat buildup during operation. * **Shading Coils:** Small copper loops embedded in the magnet face to prevent "chattering" (vibration) by maintaining a magnetic hold during the AC zero-crossing. ### D. The "S" Suffix (Separate Control) * **Circuitry:** The "S" indicates the contactor is wired for a **Separate Control Power Source**. * **Configuration:** This means the coil is not powered directly from the lines (L1, L2, L3) but rather from an external source (like a transformer or a PLC output). --- ## 3. Wiring Configuration | Terminal Label | Description | | :--- | :--- | | **L1, L2, L3** | Line Input (Main Power) | | **T1, T2, T3** | Load Output (Motor/Heater connection) | | **A1, A2** | Coil Terminals (120V Control Signal) | | **13, 14 (NO)** | Auxiliary Contact (used for status feedback or "holding" circuits) | --- ## 4. Maintenance & Wear Parts Because this is an electromechanical device, certain parts are considered "consumables": 1. **Contact Kits:** The silver tips eventually pit and erode; they can be replaced without replacing the whole unit. 2. **Replacement Coils:** The coil can burn out if the voltage fluctuates or if the mechanical linkage jams. 3. **Return Springs:** Ensure the contacts pull apart instantly when power is removed.
    ✨ Follow-up Questions
    • ⤷ What is the difference between a NEMA Size 0 and a Size 1 contactor?
    • ⤷ How do I wire the 'Separate Control' (S suffix) to a control transformer?
    • ⤷ What are the common causes of coil failure in Square D 8502 series contactors?