| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
ST7LITE49K2 bảng dữ liệu(PDF) 216 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST7LITE49K2 bảng dữ liệu(HTML) 216 Page - STMicroelectronics |
|
216 / 245 page ![]() Electrical characteristics ST7LITE49K2 216/245 13.9.2 Output driving current Subject to general operating conditions for VDD, fCPU, and TA unless otherwise specified. Table 97. Output driving current characteristics Symbol Parameter Conditions Min Max Unit VOL (1) Output low level voltage for a standard I/O pin when 8 pins are sunk at same time (see Figure 105) IIO=+5 mA, TA≤125 °C 1.0 V IIO=+2 mA, TA≤ 125 °C 0.4 Output low level voltage for a high sink I/O pin when 4 pins are sunk at same time (see Figure 108) IIO=+20 mA, TA≤125 °C 1.3 IIO=+8 mA TA≤125 °C 0.75 VOH (2) Output high level voltage for an I/O pin when 4 pins are sourced at same time (see Figure 116) IIO=-5 mA, TA≤125 °C VDD-1.5 IIO=-2 mA TA≤125 °C VDD-0.8 VOL (1)(3) Output low level voltage for a standard I/O pin when 8 pins are sunk at same time (see Figure 104 and Figure 107) IIO=+2 mA TA≤125 °C 0.5 Output low level voltage for a high sink I/O pin when 4 pins are sunk at same time IIO=+8 mA TA≤125 °C 0.6 VOH (2)(3) Output high level voltage for an I/O pin when 4 pins are sourced at same time (Figure 115) IIO=-2 mA TA≤125 °C VDD-0.8 VOL (1)(3) Output low level voltage for a standard I/O pin when 8 pins are sunk at same time (see Figure 103) IIO=+2 mA TA≤125 °C 0.6 Output low level voltage for a high sink I/O pin when 4 pins are sunk at same time (see Figure 106) IIO=+8 mA TA≤125 °C 0.7 VOH (2)(3) Output high level voltage for an I/O pin when 4 pins are sourced at same time (see Figure 114) IIO=-2 mA TA≤125 °C VDD-0.1 1. The IIO current sunk must always respect the absolute maximum rating specified in Section Table 70. and the sum of IIO (I/O ports and control pins) must not exceed IVSS. 2. The IIO current sourced must always respect the absolute maximum rating specified in Section Table 70. and the sum of IIO (I/O ports and control pins) must not exceed IVDD. 3. Not tested in production, based on characterization results. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |