PIC18F2680ISPQTP datasheet(284/482 Pages) MICROCHIP

284 / 482 page

PIC18F2585/2680/4585/4680

DS39625C-page 282

Preliminary

23.2.2

DEDICATED CAN TRANSMIT

BUFFER REGISTERS

This section describes the dedicated CAN Transmit

Buffer registers and their associated control registers.

TXBnCON: TRANSMIT BUFFER n CONTROL REGISTERS [0

≤ n ≤ 2]

Mode 0

R/C-0

R-0

R/W-0

U-0

R/W-0

TXBIF

TXABT(1)

TXLARB(1)

TXERR(1)

TXREQ(2)

—

TXPRI1(3)

TXPRI0(3)

Mode 1, 2

R/C-0

R-0

R/W-0

U-0

R/W-0

TXBIF

TXABT(1)

TXLARB(1)

TXERR(1)

TXREQ(2)

—

TXPRI1(3)

TXPRI0(3)

bit 7

bit 0

bit 7

TXBIF: Transmit Buffer Interrupt Flag bit

= Transmit buffer has completed transmission of message and may be reloaded

= Transmit buffer has not completed transmission of a message

bit 6

TXABT: Transmission Aborted Status bit(1)

= Message was aborted

= Message was not aborted

bit 5

TXLARB: Transmission Lost Arbitration Status bit(1)

= Message lost arbitration while being sent

= Message did not lose arbitration while being sent

bit 4

TXERR: Transmission Error Detected Status bit(1)

= A bus error occurred while the message was being sent

= A bus error did not occur while the message was being sent

bit 3

TXREQ: Transmit Request Status bit(2)

= Requests sending a message. Clears the TXABT, TXLARB and TXERR bits.

= Automatically cleared when the message is successfully sent

bit 2

Unimplemented: Read as ‘0’

bit 1-0

TXPRI1:TXPRI0: Transmit Priority bits(3)

= Priority Level 3 (highest priority)

= Priority Level 2

= Priority Level 1

= Priority Level 0 (lowest priority)

Note 1: This bit is automatically cleared when TXREQ is set.

2: While TXREQ is set, Transmit Buffer registers remain read-only. Clearing this bit in

software while the bit is set will request a message abort.

3: These bits define the order in which transmit buffers will be transferred. They do not alter

the CAN message identifier.

Legend:

C = Clearable bit

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

-n = Value at POR

‘1’ = Bit is set

‘0’ = Bit is cleared

x = Bit is unknown

PIC18F2680ISPQTP bảng dữ liệu(PDF) 284 Page - Microchip Technology

PIC18F2680ISPQTP bảng dữ liệu(HTML) 284 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL