| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
PLL2_C3 bảng dữ liệu(PDF) 125 Page - Altera Corporation |
|
|
|||||||||||||||||||||||||||||
PLL2_C3 bảng dữ liệu(HTML) 125 Page - Altera Corporation |
|
125 / 274 page ![]() Chapter 7: High-Speed Differential Interfaces in the Cyclone III Device Family 7–3 High-Speed I/O Interface December 2011 Altera Corporation Cyclone III Device Handbook Volume 1 Table 7–1 lists which I/O bank supports these I/O standards in the Cyclone III device family. You can use I/O pins and internal logic to implement a high-speed differential interface in the Cyclone III device family. The Cyclone III device family does not contain dedicated serialization or deserialization circuitry. Therefore, shift registers, internal phase-locked loops (PLLs), and I/O cells are used to perform serial-to-parallel conversions on incoming data and parallel-to-serial conversion on outgoing data. The differential interface data serializers and deserializers (SERDES) are automatically constructed in the core logic elements (LEs) with the Quartus® II software ALTLVDS megafunction. Table 7–1. Differential I/O Standards Supported in Cyclone III Device Family I/O Banks Differential I/O Standards I/O Bank Location External Resistor Network at Transmitter Transmitter (TX) Receiver (RX) LVDS 1,2,5,6 Not Required Yes Yes All Three Resistors RSDS 1,2,5,6 Not Required Yes Not Supported 3, 4, 7, 8 Three Resistors All Single Resistor mini-LVDS 1,2,5,6 Not Required Yes Not Supported All Three Resistors PPDS 1,2,5,6 Not Required Yes Not Supported All Three Resistors BLVDS (1) All Single Resistor Yes Yes LVPECL (2) All NA Not Supported Yes Differential SSTL-2 (3) All NA Yes Yes Differential SSTL-18 (3) All NA Yes Yes Differential HSTL-18 (3) All NA Yes Yes Differential HSTL-15 (3) All NA Yes Yes Differential HSTL-12 (3) All NA Yes Yes Notes to Table 7–1: (1) Transmitter and Receiver FMAX depend on system topology and performance requirement. (2) The LVPECL I/O standard is only supported on dedicated clock input pins. (3) The differential SSTL-2, SSTL-18, HSTL-18, HSTL-15, and HSTL-12 I/O standards are only supported on clock input pins and PLL output clock pins. PLL output clock pins do not support Class II interface type of differential SSTL-18, HSTL-18, HSTL-15, and HSTL-12 I/O standards. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |