PIC16F1526 datasheet(149/354 Pages) MICROCHIP

149 / 354 page

 2011 Microchip Technology Inc.

Preliminary

DS41458A-page 149

PIC16(L)F1526/27

16.0

ANALOG-TO-DIGITAL

CONVERTER (ADC) MODULE

The

Analog-to-Digital

Converter

(ADC)

allows

conversion of an analog input signal to a 10-bit binary

representation of that signal. This device uses analog

inputs, which are multiplexed into a single sample and

hold circuit. The output of the sample and hold is

connected to the input of the converter. The converter

generates a 10-bit binary result via successive

approximation and stores the conversion result into the

ADC result registers (ADRESH:ADRESL register pair).

Figure 16-1 shows the block diagram of the ADC.

The ADC voltage reference is software selectable to be

either internally generated or externally supplied.

The ADC can generate an interrupt upon completion of

a conversion. This interrupt can be used to wake-up the

device from Sleep.

FIGURE 16-1:

ADC BLOCK DIAGRAM

Note 1:

When ADON = 0, all multiplexer inputs are disconnected.

See ADCON0 register (Example 16-1) for detailed analog channel selection per device.

Temp Indicator

VDD

VREF

ADPREF = 10

ADPREF = 00

ADPREF = 11

FVR Buffer1

ADON(1)

GO/DONE

VSS

ADC

00000

00001

00010

00011

11110

CHS<4:0>(2)

AN0

AN1

AN2

VREF+/AN3

11111

ADRESH ADRESL

ADFM

= Left Justify

= Right Justify

AN29

11101

00100

00101

00110

AN4

AN5

AN6

PIC16F1526 bảng dữ liệu(PDF) 149 Page - Microchip Technology

PIC16F1526 bảng dữ liệu(HTML) 149 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL