| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
16F1825 bảng dữ liệu(PDF) 152 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
16F1825 bảng dữ liệu(HTML) 152 Page - Microchip Technology |
|
152 / 420 page ![]() PIC16F/LF1825/1829 DS41440A-page 152 Preliminary 2010 Microchip Technology Inc. 16.1 ADC Configuration When configuring and using the ADC the following functions must be considered: • Port configuration • Channel selection • ADC voltage reference selection • ADC conversion clock source • Interrupt control • Result formatting 16.1.1 PORT CONFIGURATION The ADC can be used to convert both analog and digital signals. When converting analog signals, the I/O pin should be configured for analog by setting the associated TRIS and ANSEL bits. Refer to Section 12.0 “I/O Ports” for more information. 16.1.2 CHANNEL SELECTION There are up to 15 channel selections available: • AN<7:0> pins (PIC16F/LF1825 only) • AN<11:0> pins (PIC16F/LF1829 only) • Temperature Indicator • DAC Output • FVR (Fixed Voltage Reference) Output Refer to Section 17.0 “Digital-to-Analog Converter (DAC) Module”, Section 14.0 “Fixed Voltage Refer- ence (FVR)” and Section 15.0 “Temperature Indicator Module” for more information on these channel selec- tions. The CHS bits of the ADCON0 register determine which channel is connected to the sample and hold circuit. When changing channels, a delay is required before starting the next conversion. Refer to Section 16.2 “ADC Operation” for more information. 16.1.3 ADC VOLTAGE REFERENCE The ADPREF bits of the ADCON1 register provides control of the positive voltage reference. The positive voltage reference can be: •VREF+ pin •VDD • FVR 2.048V • FVR 4.096V (Not available on LF devices) The ADNREF bits of the ADCON1 register provides control of the negative voltage reference. The negative voltage reference can be: •VREF- pin •VSS See Section 14.0 “Fixed Voltage Reference (FVR)” for more details on the fixed voltage reference. Note: Analog voltages on any pin that is defined as a digital input may cause the input buf- fer to conduct excess current. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |