| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
PIC24FJ64GA104T-E/SS bảng dữ liệu(PDF) 272 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC24FJ64GA104T-E/SS bảng dữ liệu(HTML) 272 Page - Microchip Technology |
|
272 / 308 page ![]() PIC24FJ64GA104 FAMILY DS39951C-page 272 2010 Microchip Technology Inc. TABLE 28-7: DC CHARACTERISTICS: POWER-DOWN PERIPHERAL MODULE CURRENT (IPD) DC CHARACTERISTICS Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated) Operating temperature -40°C TA +85°C for Industrial -40°C TA +125°C for Extended Parameter No. Typical(1) Max Units Conditions Power-Down Current (IPD): PMD Bits are Set, PMSLP Bit is ‘0’(2) DC61 0.2 0.7 A-40°C 2.0V(3) 31 kHz LPRC Oscillator with RTCC, WDT, DSWDT or Timer 1: ILPRC(5) DC61a 0.2 0.7 A+25°C DC61i 0.2 0.7 A+60°C DC61b 0.23 0.7 A+85°C DC61m 0.3 1.0 A +125°C DC61c 0.25 0.9 A-40°C 2.5V(3) DC61d 0.25 0.9 A+25°C DC61j 0.25 0.9 A+60°C DC61e 0.28 0.9 A+85°C DC61p 0.5 1.2 A +125°C DC61f 0.6 1.5 A-40°C 3.3V(4) DC61g 0.6 1.5 A+25°C DC61k 0.6 1.5 A+60°C DC61h 0.8 1.5 A+85°C DC61n 1.0 1.7 A +125°C DC62 0.5 1.0 A-40°C 2.0V(3) Low drive strength, 32 kHz Crystal with RTCC, DSWDT or Timer1: ISOSC; SOSCSEL = 01 DC62a 0.5 1.0 A+25°C DC62i 0.5 1.0 A+60°C DC62b 0.5 1.3 A+85°C DC62m 0.6 1.6 A +125°C DC62c 0.7 1.5 A-40°C 2.5V(3) DC62d 0.7 1.5 A+25°C DC62j 0.7 1.5 A+60°C DC62e 0.7 1.8 A+85°C DC62n 0.8 2.1 A +125°C DC62f 1.5 2.0 A-40°C 3.3V(4) DC62g 1.5 2.0 A+25°C DC62k 1.5 2.0 A+60°C DC62h 1.5 2.5 A+85°C DC62p 1.9 3.0 A +125°C Note 1: Data in the Typical column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only and are not tested. 2: Peripheral IPD deltas are measured with the device in Sleep mode (all peripherals and clocks shut down). All I/Os are configured as inputs and pulled high. Only the peripheral or clock being measured is enabled. PMSLP bit is clear and the Peripheral Module Disable bits (PMD) for all unused peripherals are set. 3: On-chip voltage regulator is disabled (DISVREG is tied to VDD). 4: On-chip voltage regulator is enabled (DISVREG is tied to VSS). Low-Voltage Detect (LVD) and Brown-out Detect (BOD) are enabled. 5: The current is the additional current consumed when the module is enabled. This current should be added to the base IPD current. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |