ATmega16A datasheet(203/352 Pages) ATMEL

tên linh kiện	ATmega16A

Giải thích chi tiết về linh kiện	8-bit Microcontroller with 16K Bytes In-System Programmable Flash

PDF	352 Pages

Scroll/Zoom	100%

nhà sản xuất	ATMEL [ATMEL Corporation]

Trang chủ	http://www.atmel.com

Logo

203 / 352 page

203

8154B–AVR–07/09

ATmega16A

• Bits 7:0 – TWD: TWI Data Register

These eight bits contain the next data byte to be transmitted, or the latest data byte received on

the Two-wire Serial Bus.

20.9.5

TWA R– TWI (Slave) Address Register

The TWAR should be loaded with the 7-bit Slave address (in the seven most significant bits of

TWAR) to which the TWI will respond when programmed as a Slave Transmitter or receiver. In

multi-master systems, TWAR must be set in Masters which can be addressed as Slaves by

other Masters.

The LSB of TWAR is used to enable recognition of the general call address ($00). There is an

associated address comparator that looks for the Slave address (or general call address if

enabled) in the received serial address. If a match is found, an interrupt request is generated.

• Bits 7:1 – TWA[6:0]: TWI (Slave) Address Register

These seven bits constitute the Slave address of the TWI unit.

• Bit 0 – TWGCE: TWI General Call Recognition Enable Bit

If set, this bit enables the recognition of a General Call given over the Two-wire Serial Bus.

Bit

6543

TWA6

TWA5

TWA4

TWA3

TWA2

TWA1

TWA0

TWGCE

TWAR

Read/Write

R/W

Initial Value

1111

ATmega16A bảng dữ liệu(PDF) 203 Page - ATMEL Corporation