ATmega324P datasheet(254/377 Pages) ATMEL

tên linh kiện	ATmega324P

Giải thích chi tiết về linh kiện	8-bit Microcontroller with 16/32/64K Bytes In-System Programmable Flash

PDF	377 Pages

Scroll/Zoom	100%

nhà sản xuất	ATMEL [ATMEL Corporation]

Trang chủ	http://www.atmel.com

Logo

254 / 377 page

254

7674F–AVR–09/09

ATmega164P/324P/644P

21.7.4

ADC Accuracy Definitions

An n-bit single-ended ADC converts a voltage linearly between GND and V

REF in 2

n steps

(LSBs). The lowest code is read as 0, and the highest code is read as 2

n-1.

Several parameters describe the deviation from the ideal behavior:

• Offset: The deviation of the first transition (0x000 to 0x001) compared to the ideal transition (at

0.5 LSB). Ideal value: 0 LSB.

Figure 21-10. Offset Error

• Gain Error: After adjusting for offset, the Gain Error is found as the deviation of the last

transition (0x3FE to 0x3FF) compared to the ideal transition (at 1.5 LSB below maximum).

Ideal value: 0 LSB

Figure 21-11. Gain Error

• Integral Non-linearity (INL): After adjusting for offset and gain error, the INL is the maximum

deviation of an actual transition compared to an ideal transition for any code. Ideal value: 0

LSB.

Output Code

VREF Input Voltage

Ideal ADC

Actual ADC

Offset

Error

Output Code

VREF Input Voltage

Ideal ADC

Actual ADC

Gain

Error

ATmega324P bảng dữ liệu(PDF) 254 Page - ATMEL Corporation