ATmega16 datasheet(279/357 Pages) ATMEL

tên linh kiện	ATmega16

Giải thích chi tiết về linh kiện	8-bit Microcontroller with 16K Bytes In-Syustem Programmable Flash

PDF	357 Pages

Scroll/Zoom	100%

nhà sản xuất	ATMEL [ATMEL Corporation]

Trang chủ	http://www.atmel.com

Logo

279 / 357 page

279

2466S–AVR–05/09

ATmega16(L)

Figure 139. State Machine Sequence for Changing the Instruction Word

AVR_RESET ($C)

The AVR specific public JTAG instruction for setting the AVR device in the Reset mode or taking

the device out from the Reset Mode. The TAP controller is not reset by this instruction. The one

bit Reset Register is selected as Data Register. Note that the Reset will be active as long as

there is a logic “one” in the Reset Chain. The output from this chain is not latched.

The active states are:

•

Shift-DR: The Reset Register is shifted by the TCK input.

PROG_ENABLE ($4)

The AVR specific public JTAG instruction for enabling programming via the JTAG port. The 16-

bit Programming Enable Register is selected as Data Register. The active states are the

following:

•

Shift-DR: The programming enable signature is shifted into the Data Register.

•

Update-DR: The programming enable signature is compared to the correct value, and

Programming mode is entered if the signature is valid.

Test-Logic-Reset

Run-Test/Idle

Shift-DR

Exit1-DR

Pause-DR

Exit2-DR

Update-DR

Select-IR Scan

Capture-IR

Shift-IR

Exit1-IR

Pause-IR

Exit2-IR

Update-IR

Select-DR Scan

Capture-DR

ATmega16 bảng dữ liệu(PDF) 279 Page - ATMEL Corporation