ATmega16 datasheet(160/357 Pages) ATMEL

tên linh kiện	ATmega16

Giải thích chi tiết về linh kiện	8-bit Microcontroller with 16K Bytes In-Syustem Programmable Flash

PDF	357 Pages

Scroll/Zoom	100%

nhà sản xuất	ATMEL [ATMEL Corporation]

Trang chủ	http://www.atmel.com

Logo

160 / 357 page

160

2466S–AVR–05/09

ATmega16(L)

The recommendations of the maximum receiver baud rate error was made under the assump-

tion that the receiver and transmitter equally divides the maximum total error.

There are two possible sources for the receivers baud rate error. The receiver’s system clock

(XTAL) will always have some minor instability over the supply voltage range and the tempera-

ture range. When using a crystal to generate the system clock, this is rarely a problem, but for a

resonator the system clock may differ more than 2% depending of the resonators tolerance. The

second source for the error is more controllable. The baud rate generator can not always do an

exact division of the system frequency to get the baud rate wanted. In this case an UBRR value

that gives an acceptable low error can be used if possible.

96.00

103.90

+3.90/-4.00

± 1.5

96.39

103.53

+3.53/-3.61

± 1.5

96.70

103.23

+3.23/-3.30

± 1.0

Table 62. Recommended Maximum Receiver Baud Rate Error for Double Speed Mode (U2X =

# (Data+Parity Bit)

slow (%)

fast (%)

Max Total

Error (%)

Recommended Max

Receiver Error (%)

ATmega16 bảng dữ liệu(PDF) 160 Page - ATMEL Corporation