công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

H8S/2111B bảng dữ liệu(PDF) 363 Page - Renesas Technology Corp

tên linh kiện H8S/2111B
Giải thích chi tiết về linh kiện  16-Bit Single-Chip Microcomputer
PDF  582 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  RENESAS [Renesas Technology Corp]
Trang chủ  http://www.renesas.com
Logo RENESAS - Renesas Technology Corp

H8S/2111B bảng dữ liệu(HTML) 363 Page - Renesas Technology Corp

Back Button H8S/2111B Datasheet HTML 359Page - Renesas Technology Corp H8S/2111B Datasheet HTML 360Page - Renesas Technology Corp H8S/2111B Datasheet HTML 361Page - Renesas Technology Corp H8S/2111B Datasheet HTML 362Page - Renesas Technology Corp H8S/2111B Datasheet HTML 363Page - Renesas Technology Corp H8S/2111B Datasheet HTML 364Page - Renesas Technology Corp H8S/2111B Datasheet HTML 365Page - Renesas Technology Corp H8S/2111B Datasheet HTML 366Page - Renesas Technology Corp H8S/2111B Datasheet HTML 367Page - Renesas Technology Corp Next Button
Zoom Inzoom in Zoom Outzoom out
 363 / 582 page
background image
Rev. 1.00, 05/04, page 329 of 544
In slave transmit mode, the slave device outputs the transmit data, while the master device outputs
the receive clock and returns an acknowledge signal. The transmission procedure and operations in
slave transmit mode are described below.
1. Initialize slave receive mode and wait for slave address reception.
2. When the slave address matches in the first frame following detection of the start condition,
the slave device drives SDA low at the 9th clock pulse and returns an acknowledge signal. If
the 8th data bit (R/W) is 1, the TRS bit in ICCR is set to 1, and the mode changes to slave
transmit mode automatically. The IRIC flag is set to 1 at the rise of the 9th clock. If the IEIC
bit in ICCR has been set to 1, an interrupt request is sent to the CPU. At the same time, the
ICDRE flag is set to 1. The slave device drives SCL low from the fall of the transmit clock
until ICDR data is written, to disable the master device to output the next transfer clock.
3. After clearing the IRIC flag to 0, write data to ICDR. At this time, the ICDRE flag is cleared to
0. The written data is transferred to ICDRS, and the ICDRE and IRIC flags are set to 1 again.
The slave device sequentially sends the data written into ICDRS in accordance with the clock
output by the master device.
The IRIC flag is cleared to 0 to detect the end of transmission. Processing from ICDR writing
to the IRIC flag clearing should be performed continuously. Prevent any other interrupt
processing from being inserted.
4. The master device drives SDA low at the 9th clock pulse, and returns an acknowledge signal.
As this acknowledge signal is stored in the ACKB bit in ICSR, this bit can be used to
determine whether the transfer operation was performed successfully. When one frame of data
has been transmitted, the IRIC flag in ICCR is set to 1 at the rise of the 9th transmit clock
pulse. When the ICDRE flag is 0, the data written into ICDR is transferred to ICDRS,
transmission starts, and the ICDRE and IRIC flags are set to 1 again. If the ICDRE flag has
been set to 1, this slave device drives SCL low from the fall of the transmit clock until data is
written to ICDR.
5. To continue transmission, write the next data to be transmitted into ICDR. The ICDRE flag is
cleared to 0. The IRIC flag is cleared to 0 to detect the end of transmission. Processing from
ICDR writing to the IRIC flag clearing should be performed continuously. Prevent any other
interrupt processing from being inserted.
Transmit operations can be performed continuously by repeating steps [4] and [5].
6. Clear the IRIC flag to 0.
7. To end transmission, clear the ACKE bit in ICCR to 0, to clear the acknowledge bit stored in
the ACKB bit to 0.
8. Clear the TRS bit to 0 for the next address reception, to set slave receive mode.
9. Dummy-read ICDR to release SDA on the slave side.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com